Panasonic AW-UN70 Operating Instructions

Panasonic AW-UN70 Manual

Get Panasonic AW-UN70 PDF manuals and user guides View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AW-UN70 manual content summary:

  • Panasonic AW-UN70 | Operating Instructions - Page 1
    4K Integrated Camera Model No. AW‑UN70WPC Model No. AW‑UN70KPC Model No. AW‑UN70WE Model No. AW‑UN70KE ● How the Operating Instructions are configured : The describes the procedure for basic operation and installation. Before installing this
  • Panasonic AW-UN70 | Operating Instructions - Page 2
    Other names of companies and products contained in these Operating Instructions may be trademarks or registered trademarks of their respective in manual AW‑UN70WPC, AW‑UN70KPC, AW‑UN70WE, AW‑UN70KE AW‑UN70 AW‑HS50N AW‑HS50E AW‑HS50 AW‑RP50N AW‑RP50E AW‑RP50 AW-RP120G AK-HRP200G AW-RP120 AK
  • Panasonic AW-UN70 | Operating Instructions - Page 3
    Firmware problems Manual shooting  14 Image screen [Image/Audio]  70 Manually adjusting the focus  14 Multi screen setup screen [Multi-screen]  90 Manually AW‑RP120 Remote Camera Activation  127 Controller  29 Operations on the AK‑HRP200 Remote Operation Troubleshooting
  • Panasonic AW-UN70 | Operating Instructions - Page 4
    with a Panasonic camera controller is also possible via Panasonic's proprietary serial communication format. ●● The unit supports standard serial the unit can output Full HD images at up to 60 fps via a network. With 4K image quality, it can also provide output at up to 30 fps. ●● Changing the
  • Panasonic AW-UN70 | Operating Instructions - Page 5
    kinds of problems. ●● Use the desktop version of Internet Explorer. (Internet Explorer for Windows UI is not supported.) ●● For the most recent information on compatible operating systems and web browsers, visit the support desk at the following web site. http://pro-av.panasonic.net/ ■■Disclaimer
  • Panasonic AW-UN70 | Operating Instructions - Page 6
    changed and the original settings are to be restored, refer to the "What to do when encountering problems in the basic shooting operations" (page 12) and "Camera screen" (page 36) in "Camera auto settings will be turned on, and manual operations will no longer be possible for some of the items. 6
  • Panasonic AW-UN70 | Operating Instructions - Page 7
    the units and devices connected in the system to OFF. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 4 If a multiple number of units are going to be used, repeat steps 2 and 3 as required. The
  • Panasonic AW-UN70 | Operating Instructions - Page 8
    format. ●● This unit cannot display H.264 format 4K images on the Live screen. To display 4K images, use an external device or external software that supports 4K images. SD card(4K): Inserting an SD card (optional accessory) into the unit enables recording 4K video in H.264 format to the SD card
  • Panasonic AW-UN70 | Operating Instructions - Page 9
    operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Selecting the shooting menu, for example, all the auto settings will be turned on, and manual operations will no longer be possible for some of the items. Full Auto
  • Panasonic AW-UN70 | Operating Instructions - Page 10
    camera menu display is exited. 3 Press the [▲] or [▼] button to bring the cursor to "Camera". When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 10
  • Panasonic AW-UN70 | Operating Instructions - Page 11
    (the subject becomes reduced in size): Tilt the [ZOOM] lever toward the WIDE direction. ●●Changing the pan/tilt direction and zoom speed When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 11
  • Panasonic AW-UN70 | Operating Instructions - Page 12
    encountering problems in the basic shooting operations If the trouble is not resolved by taking the action suggested below, refer to "Troubleshooting" following the procedure below. When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. ●● If the unit's
  • Panasonic AW-UN70 | Operating Instructions - Page 13
    shooting (pages 14 to 15) ●● Manual adjustment of focus ●● Manual adjustment of iris ●● Manual adjustment of shutter speed ●● Manual adjustment of gain Black level (master pedestal) adjustment (page 21) ●● This adjustment is performed to align the black level (pedestal level) of a multiple number
  • Panasonic AW-UN70 | Operating Instructions - Page 14
    the automatic adjustment. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Note ●● When the focus is set to manual, the subject may go out of focus during panning, tilting and zooming. Therefore
  • Panasonic AW-UN70 | Operating Instructions - Page 15
    controller Note ●● When the following settings are made on the AW‑UN70, the shutter speed cannot be manually adjusted (as the camera is locked in auto mode). • (AGC). When using an AW-RP50, AW-RP120 or AK-HRP200: For details, refer to the operating instructions supplied with the controller.
  • Panasonic AW-UN70 | Operating Instructions - Page 16
    controller that is used for operation. ●● The focus and iris operating modes (manual and auto settings) are not registered. The current focus and iris values When using an AW-RP50 or AW-RP120: Up to 100 entries can be registered/recalled. For details, refer to the operating instructions for the
  • Panasonic AW-UN70 | Operating Instructions - Page 17
    the two memories to store settings corresponding to different shooting conditions. Note ●● When Shooting mode (Scene) on the AW‑UN70 is set to "Full Auto", the white balance cannot be manually adjusted (ATW mode is activated). For details, refer to "Selecting the shooting modes (scene files)" (pages
  • Panasonic AW-UN70 | Operating Instructions - Page 18
    6 Press the [○] button. "White Balance Mode" starts blinking. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 7 Press the [▲] or [▼] button to change the "White Balance Mode" to be used to "AWB
  • Panasonic AW-UN70 | Operating Instructions - Page 19
    White balance adjustment (continued) ●●Auto tracking white adjustment (ATW) When white balance adjustment is set to "ATW", the white balance will be corrected automatically, even if the light source or color temperature changes. This function works when "ATW" is selected instead of "AWB A" or "AWB
  • Panasonic AW-UN70 | Operating Instructions - Page 20
    (R gain and B gain adjustment) White balance can be adjusted manually. Note ●● R/B gain adjustments can only be performed when "White the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Return Refer to the Operating Instructions of the controller. 2 Press the [▲] or
  • Panasonic AW-UN70 | Operating Instructions - Page 21
    using the wireless remote control 1 Press the [M/IRIS] button. Set the iris to the manual mode. 2 Press the [IRIS -] button. The lens iris closes until the image is using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Return 21
  • Panasonic AW-UN70 | Operating Instructions - Page 22
    support page on the following website. http://pro-av.panasonic.net/ Described below are the basic operations for changing the camera menu item settings using the wireless remote control and controller (AW‑RP50, AW . Also, refer to the Operating Instructions of the controller. Table of operations
  • Panasonic AW-UN70 | Operating Instructions - Page 23
    Instructions Supported Not supported Not supported Not supported Not supported Supported *1 Supported Supported Supported Not supported Not supported Not supported Not supported Supported with some restrictions *2 Supported Not supported Not supported Supported AW-RP655 Supported Supported
  • Panasonic AW-UN70 | Operating Instructions - Page 24
    Basic operations (continued) ■■When performing the operations using the wireless remote control 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated. 8 Press the [○] button. The value of the item to be set is entered, and it stops blinking. 9 After the
  • Panasonic AW-UN70 | Operating Instructions - Page 25
    button on the AW-RP50 for about 2 seconds. The AW‑UN70 camera menu appears on the monitor. 3 Turn the F1 dial to select an AW‑UN70 camera menu item ●●Switching between Day and Night mode 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons
  • Panasonic AW-UN70 | Operating Instructions - Page 26
    ] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. ●●Preset speed table setting (PRESET SPEED) 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [4 (AWB/ABB)] button in the [PRESET MEMORY
  • Panasonic AW-UN70 | Operating Instructions - Page 27
    ●●Optical image stabilization function setting 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". ●● When "MODE_2" is selected, the view angle changes
  • Panasonic AW-UN70 | Operating Instructions - Page 28
    DURING), color temperature settings (COLOR TEMP) and digital extender function (DIGITAL EXTENDER) to the [USER] buttons. 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY
  • Panasonic AW-UN70 | Operating Instructions - Page 29
    button on the AW-RP120 for about 2 seconds. The AW‑UN70 camera menu appears on the monitor. 3 Turn the F1 dial to select an AW‑UN70 camera menu item . ●●Switching between Day and Night mode 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu [23] button.
  • Panasonic AW-UN70 | Operating Instructions - Page 30
    press the [EXIT] button and the [ATW] button of [WHITE BAL] simultaneously. ●●Preset speed table setting (PRESET SPEED) 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu [23] button. The button lights, and the OPTION menu appears on the LCD panel. 3 Turn
  • Panasonic AW-UN70 | Operating Instructions - Page 31
    the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". ●● When "MODE_2" is selected, the view angle changes ●●Digital extender (D.EXTENDER) function setting 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu [23] button
  • Panasonic AW-UN70 | Operating Instructions - Page 32
    . ●●Camera menu operation 1 Press and hold the [CHARA/MENU] button on the AK-HRP200 for about 2 seconds. The AW‑UN70 camera menu appears on the monitor. 2 Turn the SELECT dial to select an AW‑UN70 camera menu item or to change a setting value. Turn the SELECT dial to move the cursor up and down
  • Panasonic AW-UN70 | Operating Instructions - Page 33
    For details on operations, refer to the AK-HRP200 Operating Instructions . Control/display component 1 Camera power switch 2 Viewfinder SHUTTER display selection 35 Switch Label AW‑UN70 : Supported : Supported with some restrictions -: Not supported Remarks HEAD POWER  VF POWER
  • Panasonic AW-UN70 | Operating Instructions - Page 34
    ALARM OPT IRIS/M.PED LOCK IRIS () M.PED () PUSH PREVIEW FADER FULL AUTO CLOSE SENSE COARSE EXT D.EXT SD CARD AW‑UN70 : Supported : Supported with some restrictions -: Not supported Remarks The shutter value is fixed during transition from SYNC.  • For 59.94p, 59.94i: 1/100 • For 29
  • Panasonic AW-UN70 | Operating Instructions - Page 35
    menus and change the items using the wireless remote control or controller (AW‑RP50, AW-RP120 or AK-HRP200), refer to pages 22 to 34. The "*" . Maintenance Display the Maintenance menu which concerns checking the unit's firmware versions, checking the IP address and initialize the settings. Note
  • Panasonic AW-UN70 | Operating Instructions - Page 36
    , the detailed setting and adjustment menus are not displayed. Manual1 to 3: In these modes, the detailed settings and adjustments are established manually to match the prevailing shooting conditions and the user's preferences. When the Manual1, Manual2 or Manual3 mode has been selected, the
  • Panasonic AW-UN70 | Operating Instructions - Page 37
    "ND Filter" setting to adjust light intensity as needed. Shutter Mode [Off, Step, Synchro] Select for camera shutter mode. This item can be set when "Manual" has been selected as the "Contrast Mode" setting. Off: The shutter is set to OFF (so that it cannot be tripped). Step: The step shutter
  • Panasonic AW-UN70 | Operating Instructions - Page 38
    Camera menu items (continued) Step/Synchro This is used to adjust the shutter speed in the mode which was selected as the "Shutter Mode" setting. When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the images will be darker. The shutter speeds that can be
  • Panasonic AW-UN70 | Operating Instructions - Page 39
    are output. The lens iris is forcibly set to open. ●● In Night mode, the white balance adjustment cannot be used. ●● When focus is set to manual, the focus may shift when switching between Day and Night mode, depending on the shooting conditions. If necessary, either adjust the focus or set the
  • Panasonic AW-UN70 | Operating Instructions - Page 40
    Camera menu items (continued) ■■Picture 1/3 screen *** Picture 1/3 *** Chroma Level White Balance Mode Color Temperature R Gain B Gain Pedestal 0 AWB A ---0 0 0 Return Chroma Level [-3 to +3] Set here is the color intensity (chroma level) of the images. White Balance Mode [ATW, AWB A, AWB B,
  • Panasonic AW-UN70 | Operating Instructions - Page 41
    , the OSD menu can be displayed over video output to a monitor. ●● When the Priority Mode (page 46, page 67) selection is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)", the HDR is automatically switched to "Off". ●● When the Priority Mode (page 46, page 67) selection is "NDI|HX", this item is
  • Panasonic AW-UN70 | Operating Instructions - Page 42
    Camera menu items (continued) E.DRS [Off, Low, High] Sets the E.DRS function, which provides a greater amount of compensation than DRS does when images with significant light/dark differences are displayed. Select "Low" or "High" to enhance the compensation effect. Depending on the shooting
  • Panasonic AW-UN70 | Operating Instructions - Page 43
    Camera menu items (continued) ■■16-axis color matrix (These operations can be performed only when Manual1 to 3 has been selected as the Scene setting.) *** Matrix 1/3 *** Matrix Type Normal [ Saturation ] [ Phase ] B ---- ---- B_B_Mg ---- ---- B_Mg_Mg ---- ---- Mg
  • Panasonic AW-UN70 | Operating Instructions - Page 44
    is the menu in which the camera's output image settings are configured. ## System ## Genlock Output Others ■■Genlock screen This unit supports BBS (Black Burst Sync) and tri-level synchronization. External synchronization (genlock) can be applied to achieve phase alignment when multiple cameras
  • Panasonic AW-UN70 | Operating Instructions - Page 45
    format [When the Priority Mode is set to a setting other than "HDMI(4K)"] ●● Signals of the same video format are output from the HDMI and SDI changing to match the video format of "HDMI". [When the Priority Mode is set to "HDMI(4K)"] ●● When "HDMI" is set to "2160/29.97p" or "2160/25p", you can
  • Panasonic AW-UN70 | Operating Instructions - Page 46
    from a personal computer connected via the network. ●● This unit cannot display H.264 format 4K images on the Live screen. To display 4K images, use an external device or external software that supports 4K images. Priority mode change confirmation screen ### Priority Mode ### Are you O.K.? No Yes
  • Panasonic AW-UN70 | Operating Instructions - Page 47
    frequency When the currently selected frequency is changed in the Output screen, the frequency-change confirmation screen appears. Note ●● When using a monitor that does not support the 59.94 Hz or 50 Hz frequencies, images may not be output after the frequency is changed. Verify that the monitor
  • Panasonic AW-UN70 | Operating Instructions - Page 48
    for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Return Use this to return to the previous menu. Preset Scope
  • Panasonic AW-UN70 | Operating Instructions - Page 49
    up to 30× zoom is possible. 22× is the maximum zoom possible when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". D.Zoom: Enable the digital zoom function. Picture quality degrades as zoom increases with digital zoom. Max Digital Zoom [×2 to ×12] Set the
  • Panasonic AW-UN70 | Operating Instructions - Page 50
    Camera menu items (continued) IR Control [Disable, Enable] "Enable" or "Disable" is set here for operations conducted from the wireless remote control. The operations are enabled when the unit's power is turned on from an external device other than a wireless remote control, and they are disabled
  • Panasonic AW-UN70 | Operating Instructions - Page 51
    Camera menu items (continued) ■■Others 4/4 screen ### Others 4/4 ### Audio Input Volume Plugin Power ALC Equalizer Protocol Model Select On Line Middle Off On Off SEVIHD1 Return Audio [Off, On] Enable/disable the audio input signal from the device connected to the audio input connector. Input
  • Panasonic AW-UN70 | Operating Instructions - Page 52
    the user can check the IP Address, Subnet Mask and Default Gateway settings which have been established in the unit. Return This displays the unit's firmware version. Return Use this to return to the previous menu. Initialize This is selected to display the Initialize screen on which the user can
  • Panasonic AW-UN70 | Operating Instructions - Page 53
    Camera menu items (continued) ■■IP Network screen ### IP Network ### IP Address 192. 168. 0. 10 Subnet Mask 255. 255. 255. 0 Default Gateway 192. 168. 0. 1 ●●Concerning initialization When "Initialize" is selected on the Maintenance screen, the Initialize screen appears. Initialize screen ###
  • Panasonic AW-UN70 | Operating Instructions - Page 54
    R Saturation Phase Factory setting Full Auto Manual1 to 3 Selection items Full Auto Manual1 to Full Auto, Manual1, Manual2, Manual3 Manual3 ---- Auto Auto, Manual 0 0 -10 to +10 ---- Off ●● When 59.94 Hz is selected: Off, 1/60, 1/100, 1/120, 1/250 ●● When 50 Hz is selected: Off
  • Panasonic AW-UN70 | Operating Instructions - Page 55
    /25PsF, 1080/25p, 720/50p 59.94Hz, 50Hz Priority Mode AW‑UN70WE, AW‑UN70KE: 50Hz NDI|HX Install Position Desktop Preset Speed Table Fast Preset Speed USB, IP(4K), SD card(4K), USB(4K), HDMI(4K), NDI|HX Desktop, Hanging Slow, Fast 1 to 30 Mode A, Mode B, Mode C Off, On Off, On Auto, Manual Off,
  • Panasonic AW-UN70 | Operating Instructions - Page 56
    continued) Camera menu Top Menu System Others Others 4/4 Item Audio Input Volume Plugin Power ALC Equalizer Protocol Model Select Maintenance Firmware Version IP Network Initialize ---IP Address Subnet Mask Default Gateway ---- Factory setting Full Auto Manual1 to 3 Selection items Off Off
  • Panasonic AW-UN70 | Operating Instructions - Page 57
    Displaying the web screen With a personal computer connected to the unit, it is possible to view the camera's IP videos or select various settings from the web browser. Select an IP address for the personal computer within the private address range while ensuring that it is different from the
  • Panasonic AW-UN70 | Operating Instructions - Page 58
    installed, an installation confirmation message is displayed before the live screen [Live] is displayed. In a case like this, follow the on-screen instructions to install the software. For further details, refer to "Installing the plug-in viewer software" (page 47 in the ). Notes ●● When
  • Panasonic AW-UN70 | Operating Instructions - Page 59
    Web screen operations The live screen [Live] includes a "single display mode" that displays IP images from a single camera and a "multi display mode" that displays IP images from multiple cameras. See below for details on the single display mode, and see page 64 for details on the multi display
  • Panasonic AW-UN70 | Operating Instructions - Page 60
    Web screen operations (continued) 1. Menu switching [Other Menu >>] / [Stream Menu >>] Switch between menu displays. Clicking [Other Menu >>] when the Stream menu is displayed displays the Other menu. Clicking [Stream Menu >>] when the Other menu is displayed displays the Stream menu. ●● The Stream
  • Panasonic AW-UN70 | Operating Instructions - Page 61
    Web screen operations (continued) 5. SD Card Operation buttons [SD Card Operation] Perform the operations for recording the video and audio captured with the unit to an SD card. [Rec] Starts recording to an SD card. The SD access lamp on the top right of the screen is displayed in red during
  • Panasonic AW-UN70 | Operating Instructions - Page 62
    this to adjust the zoom (magnification) [+] in the Tele direction. 11.Focus [Focus] [Auto] [Near] [O.T. AF] [Far] Use this to switch between auto and manual focusing. When Auto is selected, the focus is adjusted automatically. Use this to adjust the focus in the Near direction. It does not work
  • Panasonic AW-UN70 | Operating Instructions - Page 63
    such cases, update the Web screen or display some other screen for a moment before redisplaying the Live screen. 22.Connected device indication Displays "4K Integrated Camera AW-UN70". 23.Camera title display area The name for the unit configured in the Basic screen [Basic] (page 68) appears. 63
  • Panasonic AW-UN70 | Operating Instructions - Page 64
    Web screen operations (continued) Live screen [Live] : Multi display mode In this mode, the images of a multiple number of cameras can be monitored on one screen (called the 'multi screen'). The image of 4 cameras or max. 16 cameras can be monitored at one time. When the camera title of any of the
  • Panasonic AW-UN70 | Operating Instructions - Page 65
    Web screen configurations Logging into the Web setup screen [Setup] 1. Turn on the power of the unit from the standby mode state. 4. Click the [OK] button. Click [OK] again when the following screen appears. 2. Click the [Setup] button. (page 58) The login screen appears. 3. Enter the user name
  • Panasonic AW-UN70 | Operating Instructions - Page 66
    Web screen configurations (continued) Web setup screen [Setup] The settings for the unit are selected on this screen. Note ●● The setting menu operations can be performed only by users whose access level is "1. Administrator". For the procedure used to set the access level, refer to page 91. 8 1 2 3
  • Panasonic AW-UN70 | Operating Instructions - Page 67
    H.264 format 4K images on the Live screen. To display 4K images, use an external device or external software that supports 4K images. zzsetup format is Mmm/DD/YYYY. ●● The time is in the 24-hour format. Manual - Time zone Selects the time zone according to the region where the camera is being
  • Panasonic AW-UN70 | Operating Instructions - Page 68
    "Start time & date" and "End time & date" settings cannot be set to the same value. If the same value is set, All the items under "Manual -" are restored to their original values. ●● If a more accurate time setting is required for system operation, use an NTP server. (page 98) „„Live page tab
  • Panasonic AW-UN70 | Operating Instructions - Page 69
    card. ●● The priority mode needs to be set to "SD card" or "SD card(4K)". For details, refer to "Priority mode tab [Priority mode]" (page 67). zzRecording setting 8Mbps 1280×720/25p 4Mbps 1280×720/25p 2Mbps Priority Mode SD card(4K) SD card 1280×720/25p 1Mbps Record tally Turn the function for
  • Panasonic AW-UN70 | Operating Instructions - Page 70
    Web screen configurations (continued) Image screen [Image/Audio] „„IP video settings tab [Video over IP] The JPEG image and H.264 image settings as well as the settings related to image quality are selected on this screen. zzInitial display settings for "Live" page Stream Select the images to
  • Panasonic AW-UN70 | Operating Instructions - Page 71
    Web screen configurations (continued) There are restrictions on the simultaneous transmission of JPEG and H.264. For details, refer to page 76. zzJPEG JPEG(1) • JPEG(2) • JPEG(3) Configure the settings for JPEG images. Note ●● When the Priority Mode (page 46, page 67) selection is "NDI|HX", "JPEG
  • Panasonic AW-UN70 | Operating Instructions - Page 72
    Setting value: H.264(1) 3840×2160 (This setting is fixed when the priority mode is "IP(4K)".) 1920×1080 1280×720 640×360 (when HDR is "Low" or "High") H.264(2) 1280× the specified value. *2 When "IP(4K)" is selected as for the Priority Mode, this value is fixed to support the frame rate. 72
  • Panasonic AW-UN70 | Operating Instructions - Page 73
    Web screen configurations (continued) ●●Relationship between image capture size, frame rate, and H.264 bit rate The range of H.264 bit rates that can be specified varies depending on the resolution. When the Priority Mode (page 46, page 67) selection is "IP", the following settings will be
  • Panasonic AW-UN70 | Operating Instructions - Page 74
    as "router") (page 93). For details, refer to the operating instructions for the router. Multicast An unlimited number of users can access must be configured when [Transmission type] is set to [Unicast port (MANUAL)]. Multicast address Enter the multicast IP address. Images and audio will be
  • Panasonic AW-UN70 | Operating Instructions - Page 75
    −−− ●● This unit cannot display H.264 format 4K images on the Live screen. To display 4K images, use an external device or external software that supports 4K images. ●● When "Priority Mode" is set to "SD card(4K)", "USB(4K)", or "HDMI(4K)" Settings H.264(1)/H.264(2)/H.264(3)/H.264(4) Resolution
  • Panasonic AW-UN70 | Operating Instructions - Page 76
    Web screen configurations (continued) ●● When "Priority Mode" is set to "NDI|HX" Settings H.264(1) Resolution 1920×1080 1280×720 System frequency 59.94 Hz 60fps 30fps Frame rate 15fps 5fps System frequency 50 Hz 50fps 25fps 12.5fps 5fps H.264(2) 640×360 30fps 15fps 5fps 25fps 12.5fps
  • Panasonic AW-UN70 | Operating Instructions - Page 77
    Web screen configurations (continued) „„Audio tab [Audio] Configure audio settings. Notes ●● Images and audio are not synchronized. Therefore, images and audio may be slightly out of sync. ●● The audio may skip depending on the network environment. zzAudio Audio Enable/disable the audio input
  • Panasonic AW-UN70 | Operating Instructions - Page 78
    , the detailed setting and adjustment menus are not displayed. Manual1 to 3 In these modes, the detailed settings and adjustments are established manually to match the prevailing shooting conditions and the user's preferences. When the Manual1, Manual2 or Manual3 mode has been selected, the
  • Panasonic AW-UN70 | Operating Instructions - Page 79
    , change the "ND Filter" setting to adjust light intensity as needed. Shutter Mode Select for camera shutter mode. This item can be set when "Manual" has been selected as the "Contrast Mode" setting. When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the
  • Panasonic AW-UN70 | Operating Instructions - Page 80
    Web screen configurations (continued) AGC Max Gain When "Auto" is selected as the "Gain" setting, the maximum gain-up amount can be set. Setting value: 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Factory settings: 24dB ND Filter Adjust light intensity by switching between optical ND filters
  • Panasonic AW-UN70 | Operating Instructions - Page 81
    Web screen configurations (continued) White Balance Mode The white balance mode is selected here. Select the mode when the coloring is not natural because of the nature of the light source or other factors. If the white color serving as the reference can be recognized, subjects can be shot with
  • Panasonic AW-UN70 | Operating Instructions - Page 82
    1280×720 cannot be used. • H.264(2) to (4): Cannot be used. ●● When the Priority Mode (page 46, page 67) selection is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)", the HDR is automatically switched to "Off". ●● When the Priority Mode (page 46, page 67) selection is "NDI|HX", this item is fixed
  • Panasonic AW-UN70 | Operating Instructions - Page 83
    Web screen configurations (continued) Back Light COMP. "Off" or "On" is set here for the backlight compensation function. Under backlight conditions, the function prevents darkening as a result of light striking the backs of subjects, and makes it possible to shoot images in shade or shadow more
  • Panasonic AW-UN70 | Operating Instructions - Page 84
    adjustments. Use this to adjust the focus in the Far direction. It does not work during automatic adjustments. Use this to switch between auto and manual focusing. Brightness Use this to make the image darker. It does not work during automatic adjustments. Use this to make the image lighter. It
  • Panasonic AW-UN70 | Operating Instructions - Page 85
    "Off" is set, adjust the focus as required after zooming or set the focus to the auto mode. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. zzPreset Setting Preset Speed Table Set the preset speed table (Slow, Fast). During preset playback, preset actions
  • Panasonic AW-UN70 | Operating Instructions - Page 86
    Web screen configurations (continued) „„System settings tab [System] This is the menu in which the camera's output image settings are configured. zzOutput This item's setting is reflected when the [Set] button is pressed. Frequency This item is selected to switch the frame frequency. Setting
  • Panasonic AW-UN70 | Operating Instructions - Page 87
    30× zoom is possible. 22× is the maximum zoom possible when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". D.Zoom Enable the digital zoom function. Picture quality degrades as zoom increases with digital zoom. Factory settings: i.Zoom Max Digital Zoom
  • Panasonic AW-UN70 | Operating Instructions - Page 88
    when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". ●● When "Mode2" is selected, the view angle changes to set panning, tilting or zooming operations at the manual focus setting. This item can be selected only when "Manual" has been selected as the "Focus
  • Panasonic AW-UN70 | Operating Instructions - Page 89
    Web screen configurations (continued) IR ID Configure the unit's remote control ID. The settings for this item correspond to the [CAM1] to [CAM4] buttons on the wireless remote control. Setting value: CAM1, CAM2, CAM3, CAM4 Factory settings: CAM1 CAM/BAR Switch between color bar display and camera
  • Panasonic AW-UN70 | Operating Instructions - Page 90
    Web screen configurations (continued) Multi screen setup screen [Multi-screen] The cameras whose images are to be displayed on the multi screen are set here. „„Multi screen setup tab [Multi-screen setup] This item's setting is reflected when the [Set] button is pressed. IP address Input here the
  • Panasonic AW-UN70 | Operating Instructions - Page 91
    ‑RP50 will be disabled. ●● When [User auth.] is set to [On] while [Authentication] is set to [Digest], network connection with the AW‑RP50, AW‑RP120, and AK‑HRP200 will be disabled. Password Retype password [4 to 32 half-size characters] The password is input here. Enter the setting using the [
  • Panasonic AW-UN70 | Operating Instructions - Page 92
    Web screen configurations (continued) „„Host authentication settings tab [Host auth.] Click the [Host auth.] tab of User mng. screen [User mng.]. Configure the host authorization settings that restrict the personal computers (IP addresses) that can access the unit. „„Priority stream settings tab [
  • Panasonic AW-UN70 | Operating Instructions - Page 93
    consult your network administrator. The following information is required to configure network settings. Consult your network administrator or Internet service provider. ●● IP address ●● Subnet mask ●● Default gateway (when using a gateway server or router) ●● HTTP port ●● DNS primary and secondary
  • Panasonic AW-UN70 | Operating Instructions - Page 94
    IPv6 address that includes the prefix information provided by the IPv6-compatible router. For details, refer to the operating instructions for the router. Default gateway When [Manual] is set to [On] for [IPv6 network], enter the default gateway for the unit's IPv6 network. Factory settings: blank
  • Panasonic AW-UN70 | Operating Instructions - Page 95
    Web screen configurations (continued) zzCommon (to IPv6/IPv4) HTTP port Port numbers are allocated separately. Setting range: 1 to 65535 The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670,
  • Panasonic AW-UN70 | Operating Instructions - Page 96
    mode (over HTTP): On Frame rate: 5fps * Cannot be selected when the Priority Mode is other than "IP" or "IP(4K)" because IP transmission of H.264 images is not supported. • "Network" tab in the Network setting screen Common IPv6/IPv4 Max RTP packet size: Limited(1280byte) HTTP max segment size
  • Panasonic AW-UN70 | Operating Instructions - Page 97
    an external device is required to use the FTP function. ●● To use the FTP function, set the priority mode to "SD card" or "SD card(4K)". For details, refer to "Priority mode tab [Priority mode]" (page 67). ●● When data is being transferred to an FTP server, recording to and playback from
  • Panasonic AW-UN70 | Operating Instructions - Page 98
    to the NTP server address and port No. are performed. This item's setting is reflected when the [Set] button is pressed. NTP server address When [Manual] is selected in the [NTP server address setting], input the IP address or host name of the NTP server. Maximum number of characters 0 to 128
  • Panasonic AW-UN70 | Operating Instructions - Page 99
    To use the automatic port forwarding function, the used router must support UPnP and the UPnP function must be enabled. Factory settings: displayed, refer to "No access is possible from the web browser" in the "Troubleshooting" (page 130). CRT key generate A CRT key (SSL encryption key) is
  • Panasonic AW-UN70 | Operating Instructions - Page 100
    (page 106). Note ●● When using an HTTPS connection, network connection with the AW-RP50, AW-RP120, and AK-HRP200 will be disabled. HTTPS port This sets the Port No certificate) in your personal computer in accordance with the screen instructions. (page 107) ●● When using a server certificate:
  • Panasonic AW-UN70 | Operating Instructions - Page 101
    Web screen configurations (continued) „„HTTPS settings [HTTPS] This encrypts access to the camera and sets HTTPS to improve communication safety. Setting HTTPS is performed by following the procedures below. 1 2 3 4 5 1. Generating a CRT key (SSL encryption key) (page 102) When using self-signed
  • Panasonic AW-UN70 | Operating Instructions - Page 102
    Web screen configurations (continued) „„Generating a CRT key (SSL encryption key) [CRT key generate] Notes ●● A CRT key cannot be generated when self-signed certificates and server certificates are enabled. ●● The size of the key that can be used by the Certificate Authority (CA) differs when using
  • Panasonic AW-UN70 | Operating Instructions - Page 103
    Web screen configurations (continued) „„Generating a self-signed certificate [Self-signed Certificate - Generate] Note ●● A self-signed certificate cannot be generated when a CRT key has not been generated. 1. Click the [Execute] button in [Self-signed Certificate - Generate]. [Self-signed
  • Panasonic AW-UN70 | Operating Instructions - Page 104
    Web screen configurations (continued) „„Generating a Certificate Signing Request (CSR) [CA Certificate - Generate Certificate Signing Request] Notes ●● A certificate signing request (CSR) cannot be generated if a CRT key has not been generated. ●● To generate a certificate signing request (CSR),
  • Panasonic AW-UN70 | Operating Instructions - Page 105
    Web screen configurations (continued) „„Installing a Server Certificate [CA Certificate - CA Certificate install] Notes ●● A server certificate (security certificate) cannot be installed if a Certificate Signing Request (CSR) has not been generated. ●● The server certificate must have been issued
  • Panasonic AW-UN70 | Operating Instructions - Page 106
    connection is possible. Note ●● When using an HTTPS connection, network connection with the AW-RP50, AW-RP120, and AK-HRP200 will be disabled. 2. Set the Port No. to be certificate) in your personal computer in accordance with the screen instructions. (page 107) ●● Using a server certificate Install
  • Panasonic AW-UN70 | Operating Instructions - Page 107
    the user name and password. Note ●● When the above screen is displayed after accessing a device apart from the camera or a website, there may be a security problem, so check this carefully. 107
  • Panasonic AW-UN70 | Operating Instructions - Page 108
    Web screen configurations (continued) 5. Click [Next], which is displayed in the certificate import wizard. 8. Click [Next]. Note ●● In the case of Internet Explorer 10 and 11, select the [Save destination] and click [Next]. 6. Select [Place all certificates in the following store] and click [
  • Panasonic AW-UN70 | Operating Instructions - Page 109
    Web screen configurations (continued) Maintenance screen [Maintenance] Among the various maintenance operations performed on this screen are system log checks, system version upgrading and initialization of the unit. The Maintenance screen consists of six tabs: [System log], [Product info.], [
  • Panasonic AW-UN70 | Operating Instructions - Page 110
    The unit's serial number is displayed here. Firmware version This displays the unit's firmware version. Activation counter Display the number of precautions to be observed, and follow the instructions. ●● Use the following files specified by Panasonic Corporation as the software used for version
  • Panasonic AW-UN70 | Operating Instructions - Page 111
    Web screen configurations (continued) „„Status confirmation tab [Status] Confirm the status of the unit. „„Reset settings tab [Default reset] The unit's setting data is initialized and the unit is restarted on this screen. zzUPnP Port number(HTTP) Displays the port number configured via UPnP port
  • Panasonic AW-UN70 | Operating Instructions - Page 112
    Scene4 settings System settings Preset settings When [Network] is selected in [Config data type], the following settings are saved. File name Settings AW‑UN70_ NSetting.dat Settings of the Web screen Clock settings Network settings Notes ●● After the [Execute] button is clicked, the amount of
  • Panasonic AW-UN70 | Operating Instructions - Page 113
    Web screen configurations (continued) „„Activate tab [Activate] You can perform activation (register an unlock key code) to add available functions. For details, refer to "Activation" (page 127). Download Obtain the serial number and other information for the remote camera. Upload Upload an
  • Panasonic AW-UN70 | Operating Instructions - Page 114
    SD standards. ●● Set the priority mode to "SD card" or "SD card(4K)" before use. For details, refer to "Priority mode tab [Priority mode]" (page page 120). ●● When the priority mode is "SD card" or "SD card(4K)", the IP transmission of H.264 images is not possible. SD card type microSDHC microSDXC
  • Panasonic AW-UN70 | Operating Instructions - Page 115
    size, frame rate, and bit rate from the pull-down list in the "Recording format" item. ●● "SD card tab [SD memory card]" (page 69) Guide to recording modes and recording durations Recording format / Bit rate SD card capacity / Recording duration System frequency 59.94 Hz System frequency 50 Hz
  • Panasonic AW-UN70 | Operating Instructions - Page 116
    Recording to and playing back from a memory card (continued) Playing Back Play List screen Select content individually. Select all content. Switches to top page. Returns to the previous page. Goes to the next page. 1. Click the [Play List] button of the "SD Card Operation" item. Switches to
  • Panasonic AW-UN70 | Operating Instructions - Page 117
    is performed, the playback or download operation stops. • Switching to standby state • Restarting • Switching of priority mode (from "SD card" or "SD card(4K)" to another mode) • Ejecting of SD card • Clicking of or to close playback screen You can move the slider to play back the content
  • Panasonic AW-UN70 | Operating Instructions - Page 118
    software or other software. ●● Set the priority mode to "USB" or "USB(4K)" before use. (page 67) ●● For the connection procedure, refer to "System lens iris is set to manual adjustment. Contrast [Contrast] This is not supported by this unit. Hue [Hue] This is not supported by this unit. Saturation [
  • Panasonic AW-UN70 | Operating Instructions - Page 119
    is set as "Auto". Also, if auto mode is canceled, the focus mode is set as "Manual". Exposure [Exposure] This allows you to set the shutter speed in the same way as when opposite direction. Roll [Roll] This is not supported by this unit. Low light compensation [Low Light Compensation] This is not
  • Panasonic AW-UN70 | Operating Instructions - Page 120
    or input the audio not from the unit but from the personal computer or other device. Notes ●● When the priority mode is "USB" or "USB(4K)", the IP transmission of H.264 images is not possible. ●● When the device is connected by USB, the IP video JPEG(1) setting is forcefully changed to
  • Panasonic AW-UN70 | Operating Instructions - Page 121
    Specifications iOS 8.3 Android 4.4 Notes ●● For the latest information on compatible operating systems and web browsers, visit the support desk at the following website. http://pro-av.panasonic.net/ ●● Use a standard web browser with an Android terminal. ●● Images are displayed only in the JPEG
  • Panasonic AW-UN70 | Operating Instructions - Page 122
    Displaying the web screen using a mobile terminal (continued) Preset Resolution switching When this button is pressed, the buttons for selecting the preset positions are displayed on the screen. When one of the displayed buttons is pressed, the camera's pan/tilt position moves to the preset
  • Panasonic AW-UN70 | Operating Instructions - Page 123
    When this button is pressed, the buttons for performing the iris operations are displayed on the screen. This switches the iris between auto and manual. At the auto setting, the button label is green. This adjusts the iris in the "close" direction. It does not work during automatic adjustments
  • Panasonic AW-UN70 | Operating Instructions - Page 124
    are displayed at the bottom of the screen only when the priority mode (page 46, page 67) is set to "SD card" or "SD card(4K)". Starts recording to an SD card. When this operation is performed, is displayed. Stops recording to an SD card. When this operation is performed, disappears
  • Panasonic AW-UN70 | Operating Instructions - Page 125
    and controller or web setting screen. Whatever was set or released last takes precedence. For the controller operations, refer to the Operating Instructions of the controller. The settings of the limiters using the wireless remote control will be described here. ■■Basic limiter operations 1 Press
  • Panasonic AW-UN70 | Operating Instructions - Page 126
    Limiters (continued) ■■Setting the limiters The limiter positions can be set by following the steps below. When the position is set, the tally lamp blinks once. 1 Press one of the [CAM1] to [CAM4] buttons to select the unit. ●● Setting the upper limit position of the movement range Press the [▲] or
  • Panasonic AW-UN70 | Operating Instructions - Page 127
    of the unit) is downloaded to the personal computer. 4. Connect to the following activation code generation site from the Web browser. https://panasonic.biz/cns/sav/actkey_e/ 5. Obtain the activation code following the procedure displayed on the site. The activation code "ACTIVE.LST" is downloaded
  • Panasonic AW-UN70 | Operating Instructions - Page 128
    Activation (continued) Activating the unit Checking that activation is complete 1. Click [Setup]  [Maintenance]  [Product info.] from the Web screen. 1. Click [Browse] of the "Upload" item and then specify the folder in which the obtained "ACTIVE.LST" is stored. 2. Click the [Execute] button of
  • Panasonic AW-UN70 | Operating Instructions - Page 129
    Troubleshooting ●●Operation Symptom Cause and remedial action ●● Is the AC adaptor properly?  Refer to the Operating Instructions of the controller. Cannot operate using the controller ●● The user authorization must be set to OFF when the AW-RP50, AW-RP120, and AK-HRP200 remote camera
  • Panasonic AW-UN70 | Operating Instructions - Page 130
    Troubleshooting if the unit is connected to the controller.  Refer to the Operating Instructions of the controller. ●● Has a LAN cable of category 5 or the camera] A reply returned from the unit signifies that there are no problems in operation. If a reply is not received, try following operation: •
  • Panasonic AW-UN70 | Operating Instructions - Page 131
    Troubleshooting (continued) Symptom Cause and remedial action No access is possible from the web browser Cannot access the camera from a mobile terminal ●● Are you accessing via "
  • Panasonic AW-UN70 | Operating Instructions - Page 132
    Troubleshooting ( setting been selected correctly? ●● Are external sync signals that are supported by the video signal format which has been set being input? onto the white parts of the camera menus. ●● Is the focus set to manual?  Auto focusing is initiated as soon as the focus is set to auto
  • Panasonic AW-UN70 | Operating Instructions - Page 133
    Troubleshooting (continued) Symptom Cause and remedial action No focusing in Night mode ●● 850 nm when Night mode is used. Focus manually as required. The images appear jerky when the 1080/29.97PsF or 1080/25PsF format is selected ●● Operation is problem-free.  What happens with the PsF (
  • Panasonic AW-UN70 | Operating Instructions - Page 134
    Troubleshooting (continued) Symptom Cause and remedial action When the flash is fired during shooting, only the top or bottom of the screen becomes lighter ●● With a MOS
  • Panasonic AW-UN70 | Operating Instructions - Page 135
    Troubleshooting (continued) ●●IP videos Symptom Cause and remedial action [When using Windows] ●● JPEG images can be displayed on the Live screen. ●● The images may not be refreshed or other trouble may occur with some web browsers or their version which is being used. ●● Image display may be
  • Panasonic AW-UN70 | Operating Instructions - Page 136
    Troubleshooting (continued) Symptom Cause and remedial action [When using Windows] ●● Press the [F5] key on the keyboard of the personal computer to request that the settings
  • Panasonic AW-UN70 | Operating Instructions - Page 137
    Troubleshooting (continued) Symptom Cause and remedial action The authentication screen appears repeatedly ●● Has the user name or password been changed?  If you change the user name
  • Panasonic AW-UN70 | Operating Instructions - Page 138
    adapter to the latest version. If this does not resolve the problem, adjust the hardware accelerator function as follows. This section describes the Resolution] from the menu. B Click [Advanced settings]. C Select the [Troubleshoot] tab, and click [Change setting]. D If the [User Account Control]
  • Panasonic AW-UN70 | Operating Instructions - Page 139
    Troubleshooting (continued) ●●Web browser settings Depending on the OS installed on the personal computer, the following may occur. Follow the instructions This website wants to run the following add-on: 'Web from 'Panasonic System Networks Co., Ltd.'." ●● Select [Allow]. For Internet Explorer
  • Panasonic AW-UN70 | Operating Instructions - Page 140
    Shutter 36, 78 Auto tracking white adjustment (ATW 19 AWB 80 AW-RP50 25 AW-RP120 29 B Backlight Comp 118 Back Light COMP 42, 83 Event code 109 Event log 109 Exposure 119 F Firmware file 110 Firmware version 110 Firmware Version 52 Firmware Version screen 52 Flesh Tone Mode 41, 81 Focus
  • Panasonic AW-UN70 | Operating Instructions - Page 141
    area 62, 66 Maintenance 35, 109 Maintenance screen 52 Manual 94 Manual adjustment (R gain and B gain adjustment 20 Manual - Date/time 67 Manual - End time & date 68 Manual - Start time & date 68 Manual - Summer time (daylight saving 68 Manual - Time zone 67 Matrix 37 Matrix Type 43 Max
  • Panasonic AW-UN70 | Operating Instructions - Page 142
    Index (continued) Picture 1/3 screen 40 Picture 2/3 screen 41 Picture 3/3 screen 42 Play List 116 Plugin Power 51, 77 Port number(HTTP 111 Port number(HTTPS 111 Power Line Frequency (Anti Flicker 118 Power ON 61, 66 Preset 63, 84, 122 Preset memories 16 Preset position 78, 84 Preset
  • Panasonic AW-UN70 | Operating Instructions - Page 143
    Memo 143
  • Panasonic AW-UN70 | Operating Instructions - Page 144
    Web Site: http://www.panasonic.com © Panasonic Corporation 2017
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Operating Instructions
<Operations and Settings>
4K Integrated Camera
●
How the Operating Instructions are configured
<Basics>:
The <Basics> describes the procedure for basic operation and installation. Before installing this unit, be
sure to take the time to read through <Basics> to ensure that the unit will be installed correctly.
<Operations and Settings>
(this manual):
This <Operations and Settings> describes how to operate the unit and how to establish its settings.
Model No.
AW‑UN70WPC
Model No.
AW‑UN70KPC
Model No.
AW‑UN70WE
Model No.
AW‑UN70KE
ENGLISH
DVQP1517ZA
W1217TY0 -FJ