Panasonic AW-UN70 Operating Instructions - Page 18
continued, White Balance Mode to be used to AWB
View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
White balance adjustment (continued) 5 Press the [▲] or [▼] button to bring the cursor to "White Balance Mode". 6 Press the [○] button. "White Balance Mode" starts blinking. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 7 Press the [▲] or [▼] button to change the "White Balance Mode" to be used to "AWB A" or "AWB B", and press the [○] button to enter the selection. 8 Press the [MENU] button for 2 seconds. The camera menu display is exited. 9 Press the [SET] button for 2 seconds. The auto white balance adjustment (AWB) is performed, and the white balance setting is entered. ●● When the white balance adjustment is completed successfully, "AWB OK" appears in the center of the screen. However, this does not appear when "OSD Status" is set to "Off" in the camera menu. Notes ●● White balance may not be correctly set if the lighting of the object is too weak. ●● Since the unit has a built-in memory, the set white balance will remain in the memory even if power is turned off. Therefore, it is not necessary to reset the white balance if the color temperature of those objects remains unchanged. However, it must be reset if the color temperature changes, such as when you move from indoors to outside, or vice versa. AWB OK Notes ●● The white balance cannot be adjusted when color bars are displayed. Press the [MODE] button to switch to the camera picture. ●● When the adjustment has failed, an error message such as "OUT RANGE NG", "HIGH LIGHT NG", "LOW LIGHT NG", "ATW NG", "3200K NG", "5600K NG" or "VAR NG" is displayed. However, this does not appear when "OSD Status" is set to "Off" in the camera menu. ●● In Night mode (page 36, page 39), the white balance adjustment cannot be used. 18