Panasonic AW-UN70 Operating Instructions - Page 45

Output screen

Get Panasonic AW-UN70 PDF manuals and user guides View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Camera menu items (continued) ■■Output screen ### Output ### Format HDMI SDI Frequency Priority Mode 1080/59.94i 1080/59.94i 59.94Hz IP Return Format HDMI, SDI Format HDMI SDI Setting value Frequency: 59.94Hz Frequency: 50Hz Auto 2160/29.97p 1080/59.94p 1080/59.94i 1080/29.97PsF 1080/29.97p 720/59.94p Auto 2160/25p 1080/50p 1080/50i 1080/25PsF 1080/25p 720/50p 1080/59.94p 1080/59.94i 1080/29.97PsF 1080/29.97p 720/59.94p 1080/50p 1080/50i 1080/25PsF 1080/25p 720/50p The video format is changed on this screen. The formats of the images which can be output differ between "HDMI" and "SDI". For details on how to change the format, refer to "Changing the format" (page 47). Note ●● The video signal of the SDI output may stop temporarily when the HDMI cable is disconnected and connected or the connected monitor is replaced, for example. Simultaneous output according to video format [When the Priority Mode is set to a setting other than "HDMI(4K)"] ●● Signals of the same video format are output from the HDMI and SDI OUT connectors. (The setting values in the menu will also change to match the format configured later.) ●● When "HDMI" is set to "Auto", the unit automatically determines the output video resolution based on information from the connected device. This will result in the "SDI" setting changing to match the video format of "HDMI". [When the Priority Mode is set to "HDMI(4K)"] ●● When "HDMI" is set to "2160/29.97p" or "2160/25p", you can change the "SDI" setting. ●● When the Priority Mode is set to "HDMI(4K)", the image sensor operates in "29.97p" or "25p" mode. Therefore, even when the "HDMI" or "SDI" video format is set to "59.94p" or "50p", an image generated from "29.97p" or "25p" is output. Frequency [59.94Hz, 50Hz] This item is selected to switch the frame frequency. ●● When the frequency is switched, "Format" is set as follows. 59.94Hz 50Hz 2160/29.97p  2160/25p 1080/59.94p  1080/50p 1080/59.94i  1080/50i 1080/29.97PsF  1080/25PsF 1080/29.97p  1080/25p 720/59.94p  720/50p ●● For details on how to change the frequency, see "Changing the frequency" (page 47). Note ●● If you change the frequency, the unit will restart automatically. Operation will not be possible while the unit is restarting. Some peripheral devices may not recognize that the unit has restarted. If you change the frequency, be sure to restart all peripheral devices. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
45
Camera menu items
(continued)
■
Output screen
###
Output
###
Format
HDMI
1080/59.94i
SDI
1080/59.94i
Frequency
59.94Hz
Priority Mode
IP
Return
Format
HDMI, SDI
Format
Setting value
Frequency:
59.94Hz
Frequency:
50Hz
HDMI
Auto
2160/29.97p
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
Auto
2160/25p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
SDI
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
The video format is changed on this screen.
The formats of the images which can be output differ
between “HDMI” and “SDI”.
For details on how to change the format, refer to
“Changing the format” (page 47).
●
The video signal of the SDI output may stop
temporarily when the HDMI cable is disconnected and
connected or the connected monitor is replaced, for
example.
Note
Simultaneous output according to video
format
[When the Priority Mode is set to a setting other
than “HDMI(4K)”]
●
Signals of the same video format are output from the
HDMI and SDI OUT connectors. (The setting values
in the menu will also change to match the format
configured later.)
●
When “HDMI” is set to “Auto”, the unit automatically
determines the output video resolution based on
information from the connected device. This will result
in the “SDI” setting changing to match the video
format of “HDMI”.
[When the Priority Mode is set to “HDMI(4K)”]
●
When “HDMI” is set to “2160/29.97p” or “2160/25p”,
you can change the “SDI” setting.
●
When the Priority Mode is set to “HDMI(4K)”,
the image sensor operates in “29.97p” or “25p”
mode. Therefore, even when the “HDMI” or “SDI”
video format is set to “59.94p” or “50p”, an image
generated from “29.97p” or “25p” is output.
Frequency [59.94Hz, 50Hz]
This item is selected to switch the frame frequency.
●
When the frequency is switched, “Format” is set as
follows.
59.94Hz
50Hz
2160/29.97p
2160/25p
1080/59.94p
1080/50p
1080/59.94i
1080/50i
1080/29.97PsF
1080/25PsF
1080/29.97p
1080/25p
720/59.94p
720/50p
●
For details on how to change the frequency, see
“Changing the frequency” (page 47).
●
If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
Note