Panasonic AW-UN70 Operating Instructions - Page 27
continued, Freezing images during preset playback, FREEZE DURING, Optical image stabilization function
View all Panasonic AW-UN70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Basic operations (continued) ●●Freezing images during preset playback (FREEZE DURING) 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area. The button lights, and the SETUP menu appears on the LCD panel. 3 Turn the F1 dial to select "FUNCTION", then press the F1 dial. ●●Optical image stabilization function setting 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area. The button lights, and the SETUP menu appears on the LCD panel. 3 Turn the F1 dial to select "FUNCTION", then press the F1 dial. 4 Turn the F1 dial to select "FREEZE DURING", then press the F1 dial. "Off" or "On" appears on the bottom right (F2 area) of the LCD panel. 5 Turn the F2 dial to select "Off" or "On", then press the F2 dial. Off: Do not freeze the current preset playback images. On: Freeze the current preset playback images. 4 Turn the F1 dial to select "I.S.", then press the F1 dial. "Off", "MODE_1" or "MODE_2" appears on the bottom right (F2 area) of the LCD panel. 5 Turn the F2 dial to select "Off", "MODE_1" or "MODE_2", then press the F2 dial. Off: Image stabilization function not used. MODE_1: Image stabilization function used (optical, 2-axis compensation) MODE_2: Image stabilization function used (optical+electronic, 4-axis compensation) Notes ●● "MODE_2" cannot be selected when HDR is "Low" or "High". ●● "MODE_2" cannot be selected when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". ●● When "MODE_2" is selected, the view angle changes to set aside image pixels for use during compensation. ●● When "MODE_2" is selected, display of the output image is delayed compared to the actual image. ●● Although the image stabilization of "MODE_2" (hybrid of optical and electronic compensation) produces stronger compensation than "MODE_1", depending on the shooting conditions, it may not be able to differentiate between movement of the subject and movement of the unit as it performs compensation (electronic) on movement detected in the video signal. Therefore, erroneous compensation may occur. ●● The image stabilization setting cannot be changed while data is being written to the SD card. 27