Panasonic AW-UN70 Operating Instructions - Page 81

Web screen configurations (continued) White Balance Mode The white balance mode is selected here. Select the mode when the coloring is not natural because of the nature of the light source or other factors. If the white color serving as the reference can be recognized, subjects can be shot with natural coloring. Setting value: ATW This mode automatically corrects the white balance, even if the light source or color temperature changes. AWB A, AWB B When AWB A or AWB B is selected and the white balance is executed, the adjustment results obtained are stored in the memory selected. When AWB A or AWB B is then selected, the white balance stored in the selected memory can be recalled. 3200K This white balance mode is ideal when a 3200K halogen light is used as the light source. 5600K This white balance mode is ideal when 5600K sunlight or fluorescent lighting is used as the light source. VAR Specify a color temperature from 2400K to 9900K. Factory settings: Manual1: ATW Manual2: AWB A Manual3: AWB B Color Temperature Specify a color temperature from 2400K to 9900K (in increments of about 100K). This is enabled when White Balance Mode is set to "VAR". Setting range: 2400K to 9900K Factory settings: 3200K R Gain, B Gain When "AWB A", "AWB B" or "VAR" is selected as the White Balance Mode setting, the white balance can be finely adjusted after automatic white balance (AWB) has been performed. Setting range: -30 to +30 Factory settings: 0 Notes ●● When automatic white balance (AWB) is executed, the R Gain and B Gain values are returned to "0". ●● When "AWB A", "AWB B" or "VAR" is selected as the White Balance Mode setting, the R Gain and B Gain adjustment values can be stored in the three memories, A, B and VAR. ●● When new values are set, the previous values are erased. Use each of the memories for a different purpose in accordance with the shooting conditions. ●● R Gain and B Gain adjustments cannot be performed when "White Balance Mode" is set to "ATW", "3200K", or "5600K". Detail The image detail (image sharpness) is adjusted here. When "Low" or "High" is selected, the detail is enhanced. Setting value: Off, Low, High Factory settings: Low Detail Level H The image sharpness level is adjusted here when "High" has been selected as the "Detail" setting. Setting range: Detail Level L setting +1 to 18 Factory settings: 18 Detail Level L The image sharpness level is adjusted here when "Low" has been selected as the "Detail" setting. Setting range: 1 to Detail Level H setting -1 Factory settings: 9 Flesh Tone Mode Set here is the flesh tone mode for displaying the subjects' skin so that it appears more smoothly and eye‑pleasingly. When "Low" or "High" is selected, the effect is enhanced. Setting value: Off, Low, High Factory settings: Off HDR Adjust the effect of the high dynamic range mode. When HDR is set to "Low", correction is performed so that the appropriate exposure is obtained for the light and dark areas on subjects with extremely high contrast. When "High" is selected, dark areas are made brighter. Depending on the shooting conditions, however, the picture quality may drop with increased noise. In addition, unit vibration may result in blurry or distorted images. This effect is not recommended in shooting locations where significant vibration may occur. Setting value: Off, Low, High Factory settings: Off Notes ●● When the HDR setting is changed, the monitor images will go momentarily black and the audio will be muted. Furthermore, IP video may stop for about 30 seconds. ●● When "Low" or "High" is selected, it will take longer for the brightness of the image to converge. ●● When "Low" or "High" is selected, brightness cannot be adjusted. ●● When "Low" or "High" is selected, video will be delayed by 4 frames. 81