Panasonic AW-UN70 Operating Instructions - Page 49

Camera menu items (continued) ■■Others 2/4 screen ### Others 2/4 ### Zoom Mode D.Zoom Max Digital Zoom ×12 D. Extender Off D. Extender Magnification ×8.0 OIS Off Tally Enable IR Control Enable IR ID CAM1 Return Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom] Configure the maximum zoom magnification. Opt.Zoom: Use only the optical zoom. Up to 20× optical zoom is possible. i.Zoom: Enable the i.Zoom function. Enabling this function allows you to perform electronic zoom while reducing drops in picture quality. Combining optical zoom and electronic zoom, up to 30× zoom is possible. 22× is the maximum zoom possible when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". D.Zoom: Enable the digital zoom function. Picture quality degrades as zoom increases with digital zoom. Max Digital Zoom [×2 to ×12] Set the maximum digital zoom magnification. This is only enabled when Zoom Mode is set to "D.Zoom". OIS [Off, Mode1, Mode2] Set the optical image stabilization function. Off: Image stabilization function not used. Mode1: Image stabilization function used (optical, 2-axis compensation) Mode2: Image stabilization function used (optical+electronic, 4-axis compensation) Notes ●● "Mode2" cannot be selected when HDR is "Low" or "High". ●● "Mode2" cannot be selected when the Priority Mode (page 46, page 67) is "IP(4K)", "SD card(4K)", "USB(4K)", or "HDMI(4K)". ●● When "Mode2" is selected, the view angle changes to set aside image pixels for use during compensation. ●● When "Mode2" is selected, display of the output image is delayed compared to the actual image. ●● Although the image stabilization of "Mode2" (hybrid of optical and electronic compensation) produces stronger compensation than "Mode1", depending on the shooting conditions, it may not be able to differentiate between movement of the subject and movement of the unit as it performs compensation (electronic) on movement detected in the video signal. Therefore, erroneous compensation may occur. ●● The image stabilization setting cannot be changed while data is being written to the SD card. Tally [Disable, Enable] "Enable" or "Disable" is set here for the function which turns on or turns off the tally lamp using the tally control signal. D.Extender [Off, On] Set the digital extender function Off/On. When this function is enabled, the video magnification set with the "D. Extender Magnification" (digital zoom) is further increased. In the 4K mode, you can use this function to temporarily enlarge the image for confirmation of focus and such. D.Extender Magnification [×1.4, ×2.0, ×4.0, ×6.0, ×8.0] Set the magnification for the digital extender function. 49