Panasonic BT-3DL2550 Operating Instructions - Page 23

Main Menu Menu configuration MAIN MENU 3D SYSTEM 3D INPUT TYPE SIMUL MODE H MIRROR H SHIFT LINE BY LINE OVERLAY SDI1 (L) SDI2 (R) COMPARISON MARKER VIDEO CONFIG *1 SYSTEM CONFIG FUNCTION *1 GPI *1 INPUT SELECT *1 AUDIO DISPLAY SETUP *1 CONTROL HOURMETER B.LIGHT/CONT. BACKLIGHT MENU POSITION STATUS DISPLAY SETUP LOAD SETUP SAVE POWER ON SETUP POWER SAVE MODE CALIBRATION FUNCTION1 FUNCTION2 FUNCTION3 FUNCTION4 FUNCTION5 FUNCTION DISPLAY VIDEO FORMAT NTSC SETUP SDI1 SDI2 YPBPR/RGB MODE COMPONENT LEVEL SELECT SYNC COMP. DVI-D MODE CONTROL LOCAL ENABLE OPERATION LCD *1 Setting values can be stored for both 2D and 3D. GAMMA SELECT COLOR SPACE COLOR TEMP. SHARPNESS MODE SHARPNESS H SHARPNESS V I-P MODE MONO ANAMO SD ASPECT SCAN COLOR GAIN R COLOR GAIN B GPI CONTROL GPI1 GPI2 GPI3 GPI4 GPI5 GPI6 GPI7 GPI8 TWO WINDOW SIZE SUB INPUT SEL. TIME CODE POSITION FONT SIZE MODE SELECT CLOSED CAPTION MODE SELECT SIMUL LINE BY LINE SIDE BY SIDE SMPTE-C (EX) EBU (EX) SMPTE-C EBU ITU-709 WIDE1 WIDE2 WIDE3 USER0-63 D93 D65 D56 VAR1 VAR2 VAR3 AUTOSETUP H POSITION V POSITION PHASE CLOCK WXGA/XGA RESET MARKER 16:9 4:3 BACK CENTER GPI PRESET1 GPI PRESET2 MARKER TYPE CROSS HATCH COLOR TEMP. GAIN RED GAIN BLUE BIAS RED BIAS BLUE RESET COLOR TEMP. GAIN RED GAIN BLUE BIAS RED BIAS BLUE RESET COLOR TEMP. GAIN RED GAIN BLUE BIAS RED BIAS BLUE RESET INPUT SELECT EMBEDDED SELECT L EMBEDDED SELECT R LEVEL METER CH SELECT 0 dB POINT CH INFO. Menu items that cannot be selected when the SYSTEM option is set to "2D" Menu items that are not available without being displayed when the SYSTEM option is set to "3D" 23