Panasonic BT-3DL2550 Operating Instructions - Page 44
TWO WINDOW function, Press the, button again, Press the FUNCTION button to, which the TWO WINDOW,
View all Panasonic BT-3DL2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Main Menu (continued) _ TWO WINDOW function 2D ONLY The "TWO WINDOW" function displays two inputs selected from VIDEO, SDI1/2, YPBPR/RGB or DVI-D in two windows. Each press of the button ([FUNCTION1] to [FUNCTION5]) (J page 35) to which the "TWO WINDOW" function has been assigned changes the display mode. Press the FUNCTION button to which the TWO WINDOW function has been assigned. Main window (normal window) • Main window: Displays input selected by "INPUT" in a single window. Video Press the button again Main window Sub-window Video Video Press the button again Main window Sub-window Still image Video Press the button again Sub-window • Main window: Displays input selected by "INPUT." • Sub-window: Displays input selected in the "SUB INPUT SEL." submenu under the "DISPLAY SETUP" menu. Change "GAMMA SELECT", "COLOR SPACE", "COLOR GAIN R", "COLOR GAIN B" submenu settings in the "VIDEO CONFIG" menu to enable comparison with the main window (video). • Main window: Displays input selected by "INPUT" as a still life image. • Sub-window: Displays input selected in the "SUB INPUT SEL." submenu under the "DISPLAY SETUP" menu. Change "GAMMA SELECT", "COLOR SPACE", "COLOR GAIN R", "COLOR GAIN B" submenu settings in the "VIDEO CONFIG" menu to enable comparison with the main window (still image). • Sub-window: Displays input selected in the "SUB INPUT SEL." submenu under the "DISPLAY SETUP" menu in a single window. Video Press the button again Note: • When the main window and sub-window input setting is "YPBPR/RGB" and "RGB-COMP," the main window and sub-window are displayed in a single window. When the input settings for the main window and sub-window are both "DVI-COMP," they are also displayed in a single window. • When the input signals selected in the main and sub-window differ, the color shade, etc. may differ slightly. • When the input signal terminals of video displayed in the main window and sub-window differ, the still image function does not work. • The main window is normally displayed on the left side. • When SDI1 or SDI2 is selected for the main window and sub-window, both windows will show the same screen. • When SDI2 and another input (except for a combination of SDI1 and SDI2) are used for the split screen display, TIME CODE and audio level meter display will not function. In this case, use SDI1. 44