Panasonic BT-3DL2550 Operating Instructions - Page 42
Audio
View all Panasonic BT-3DL2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Main Menu (continued) AUDIO Use the following submenus to set headphone output and audio level meters. Underlined values indicate factory defaults. Sub menu INPUT SELECT Settings AUTO ANALOG EMBEDDED SELECT L EMBEDDED SELECT R LEVEL METER *1 CH SELECT 0dB POINT CH1 - CH8 (Factory default: CH1) CH1 - CH8 (Factory default: CH2) OFF ON 8CH 4CH 2CH OFF ON Description Selects input line for audio output to headphone terminal. However, when 3D mode is set to SIMUL the selection in this menu is applied to the audio signal input from the SDI1 terminal. When an SDI input line is selected with the [INPUT] button on the front panel: Embedded audio (SDI terminal) When input lines other than SDI1 or SDI2 are selected with the [INPUT] button on the front panel: Analog (AUDIO input terminal) Analog (AUDIO input terminal) Selects embedded audio channel output to the left (L) headphone. Selects embedded audio channel output to the right (R) headphone. Selects/turns off the audio level meter displayed by OSD. Selects the number of audio level meter channels. Selects and turns off 0 dB line on/off displayed on the audio level meter. CH INFO. OFF ON Selects and turns off displays on the audio level meter. *1 When ANALOG is selected in the "INPUT SELECT" menu, the LEVEL METER does not indicate the audio level meter even when set to ON. 42