Panasonic BT-3DL2550 Operating Instructions - Page 26

Main Menu (continued) Sub menu Setting Description GPI PRESET1 *1 GPI PRESET2 *1 4:3 13:9 14:9 CNSCO VISTA 95% (16:9) 93% (16:9) 90% (16:9) 88% (16:9) 80% (16:9) USER (16:9) 95% (4:3) 93% (4:3) 90% (4:3) 88% (4:3) 80% (4:3) USER (4:3) GPI PRESET1: Selects the marker displayed by the GPI terminal "MARKER1 ON/OFF" (J page 53) operation. GPI PRESET2: Selects the marker displayed by the GPI terminal "MARKER2 ON/OFF" (J page 53) operation. 4:3 marker 13:9 marker 14:9 marker CNSCO marker VISTA marker 95% area marker for 16:9 aspect ratio 93% area marker for 16:9 aspect ratio 90% area marker for 16:9 aspect ratio 88% area marker for 16:9 aspect ratio 80% area marker for 16:9 aspect ratio 95% area marker for 4:3 aspect ratio 93% area marker for 4:3 aspect ratio 90% area marker for 4:3 aspect ratio 88% area marker for 4:3 aspect ratio 80% area marker for 4:3 aspect ratio Displays using the USER value of 16:9 / 4:3. MARKER TYPE *2*3 TYPE2 TYPE1 CROSS HATCH OFF LOW HIGH Selects conventional monitor or camera recableer marker size. Marker size compliant with the camera recorder (Panasonic) The marker has the same size as that of the previous model (BT-LH2600W). Turns the cross hatch grid on and off and sets its density. Turns the display off 20/256 gradations (displays a light cross hatch grid) 70/256 gradations (displays a dense cross hatch grid) *1 Remote control via RS-232C ends in error (error response: ER001) when "GPI PRESET1" or "GPI PRESET2" is selected with the GPI function. *2 TYPE1 and TYPE2 area marker size depends on the "MARKER TYPE" setting. *3 Display size for SD signals differ. TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT. 601-5 for PAL. TYPE2: The effective horizontal area meets the EIA-RS170A for NTSC and ITU-R BT. 470-4 for PAL. 26