Panasonic BT-3DL2550 Operating Instructions - Page 40
INPUT SELECT, Selects NTSC setup level.
View all Panasonic BT-3DL2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Main Menu (continued) INPUT SELECT Sub menu VIDEO 2D ONLY FORMAT 2D ONLY NTSC SETUP 2D ONLY Settings OFF ON AUTO NTSC PAL 75 00 SDI1 *3 SDI2 *3 YPBPR/RGB 2D ONLY MODE 2D ONLY OFF ON OFF ON OFF ON YPBPR RGB-VIDEO RGB-COMP. COMPONENT LEVEL 2D ONLY SMPTE B75 B00 SELECT SYNC INT 2D ONLY EXT COMP. 2D ONLY DVI-D *3 MODE OFF ON DVI-VIDEO DVI-COMP. Underlined values indicate factory defaults. Description Turns VIDEO line to the INPUT button on/off. *1 Selects the video input format. *2 Automatically selects NTSC or PAL. NTSC PAL Selects NTSC setup level. Select this function when using 7.5% setup signals. (Adjusts the interior of the monitor to the 7.5% setup level to suit the black level) Select this when there is no setup signal. Turns SDI1 line to the INPUT button on/off. *1 Turns SDI2 line to the INPUT button on/off. *1 Turns YPBPR/RGB line to the INPUT button on/off. *1 Selects YPBPR (component) or RGB input mode. Selects the YPBPR signal. Selects the video RGB signal. Selects the PC RGB signal. Selects YPBPR (component) signal input level. Signal level complies with SMPTE and PB and PR are 0.7 V [p-p] at 100% chroma. Select this when connecting a Betacam or similar device with a setup function. (Adjusts the interior of the monitor to the 7.5% setup level to suit the black level) Select this when connecting a Betacam or similar device without a setup function. Selects the sync signal when using YPBPR and RGB-VIDEO input. Select when the synchronizing signal is superimposed on the G or Y signal. Select to synchronize with an external synchronizing signal. Performs analog PC settings. ("COMP." J page 41) Turns DVI-D line to the INPUT button on/off. *1 Selects DVI-D input mode. Selects the RGB signal input of RGB video. Selects PC input. *1 All five input lines (VIDEO, SDI1, SDI2, YPBPR/RGB, DVI-D) cannot be turned off. An attempt to turn off all inputs ends when the fourth input line is turned off since it will not be possible to turn off the 5th input line also. *2 "AUTO" is the factory default, but select a specific format when there is risk that the input signal may be contaminated by outside noise. *3 When 3D mode is set to SIMUL, the SDI1 and SDI2 lines are selected regardless of the OFF/ON setting. 40