Panasonic BT-3DL2550 Operating Instructions - Page 29

Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu GAMMA SELECT *1*2 Setting STANDARD STDIO/PST FILM Description Selects gamma curve. The gamma curve in the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. Standard mode Color emphasis mode (a mode that approximates CRT display capability suitable for studio or postproduction application) Film mode (For VARICAM use) COLOR SPACE *7*8 COLOR TEMP. SHARPNESS MODE *2 SMPTE-C (EX) EBU (EX) SMPTE-C EBU ITU-709 WIDE1 WIDE2 WIDE3 USER0 - 63 *5*6 D93 *6 D65 *6 D56 *6 VAR1 VAR2 VAR3 HIGH *3 LOW The selected. mark appears at the top left of the screen when "FILM" is Sets the color space. The color space in the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. Redness changed from mode. *9 Redness changed from mode. *9 SMPTE-C standard EBU standard ITU-R BT. 709 standard Sets the gamma curve to 2.2 in wide color gamut (using Adobe color space) mode. Sets the gamma curve to 1.8 in wide color gamut (using Adobe color space) mode. Sets the gamma curve to 2.6 in wide color gamut (using D-Cinema color space) mode. Selects color temperature. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Adjustable settings 0 - 63 (equivalent to a color temperature range of 3,000 - 9,300K) Equivalent to a color temperature of 9,300K Equivalent to a color temperature of 6,500K Equivalent to a color temperature of 5,600K WB adjustment mode *4 WB adjustment mode *4 WB adjustment mode *4 USER20 is approximately 5,000 K and USER33 is approximately 6,300 K. Selects the width of outline correction edge. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Thin edge Wide edge *1 Changes are not reflected to a still image in the main window in the split-screen display of the "TWO WINDOW" function. *2 These functions are not available when "RGB-COMP." under "YPBPR/RGB" or "DVI-COMP." under "DVI-D" is selected in the "INPUT SELECT" menu (J page 40). The gamma curve is set to STANDARD when "RGB-COMP." or "DVI-COMP." is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve fixed to that "COLOR SPACE." *3 The following sharpness values are available and the settings for the selected input signal is displayed. Adjustment status during selection appears at the bottom right of the screen. 1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW) 2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH). 3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW). *4 Selecting "VAR1", "VAR2" and "VAR3" engages the WB adjustment mode (J page 31). *5 Procedure for selecting USER 0 - 63: 1) Press [ENTER] ("USER" changes to blue). 2) Use [ , ] to select 0 - 63 and press [ENTER]. *6 An asterisk (*) is displayed after the color temperature value in 3D mode. (Example display: D65*) This indicates that it is an adjusted value for when using 3D Polarized Eyewear. *7 Factory default setting: SMPTE-C (U.S.A. and Canada), EBU (other countries) *8 The SDI1 signal and SDI2 signal (displayed when "COMPARISON" is selected in SIMUL MODE) are set to the same color space. *9 As the red reproduction of this monitor is truer to the original than previous models (exc. BT-LH2550) red appears darker. Used when rendering colors that have a softer shade of red. 29