Panasonic BT-3DL2550 Operating Instructions - Page 30
Sub menu, Setting, Description, SHARPNESS H, I-P MODE, ANAMO, SD ASPECT, COLOR GAIN R, 2D ONLY
View all Panasonic BT-3DL2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Main Menu (continued) Sub menu Setting Description SHARPNESS H *1 0 - 30 Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. SHARPNESS V *1 2D ONLY 0 - 30 Sets vertical outline correction. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. I-P MODE *1*2 2D ONLY MODE2 MODE1 Selects IP conversion mode. (J page 30, "IP mode") Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Inter-field interpolation Inter-frame interpolation MONO *1 OFF ON Switches between color and monochrome (MONO). Color Monochrome • When ON, the CHROMA setting of the picture/volume adjusting menu is fixed at 0. ANAMO *1*3 2D ONLY OFF ON With an Anamo lens and HD-SDI input, the picture is resized to Anamo magnification (the vertically enlarged signal can be vertically compressed and corrected for display). Can be set in the split screen display of the "TWO WINDOW" function, but operation is disabled. SD ASPECT *1 2D ONLY 4:3 16:9 Sets the aspect ratio for SD signal input. Can be set in the split screen display of the "TWO WINDOW" function, but operation is disabled. 4:3 display 16:9 display SCAN *1 2D ONLY NORMAL UNDER Sets under-scan and normal display. Can be set in the split screen display of the "TWO WINDOW" function, but operation is disabled. Normal display Under-scan COLOR GAIN R 0 - 30 This fine tunes the GAIN of the R component. The R component of the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function in 2D mode. In 3D mode (COMPARISON), the R component of SDI2 (R) can be set. COLOR GAIN B 0 - 30 This fine tunes the GAIN of the B component. The B component of the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function in 2D mode. In 3D mode (COMPARISON), the B component of SDI2 (R) can be set. *1 These functions are not available when "RGB-COMP." under "YPBPR/RGB" or "DVI-COMP." under "DVI-D" is selected in the "INPUT SELECT" menu (J page 40). *2 To use the "TWO WINDOW" (J page 44) function, 1) Change settings after exiting the "TWO WINDOW" function. 2) It is recommended to use "MODE2" for handling fast video. *3 "SCAN" changes are not reflected in Anamo size display. IP mode "MODE1" performs IP conversion using inter-frame interpolation. The factory default is "MODE1". "MODE2" performs IP conversion using inter-field interpolation. Since interpolation is performed inside each field, this mode is suitable for checking interlace status. 30