Panasonic BT-3DL2550 Operating Instructions - Page 25

Main Menu (continued) MARKER Not available in the split-screen display of the "TWO WINDOW" function or COMPARISON in 3D mode. (CROSS HATCH is not affected.) Underlined values indicate factory defaults. Sub menu MARKER 16:9 *2*3*4 4:3 *2*4 BACK *2 CENTER *2 Setting OFF *1 ON OFF 4:3 13:9 14:9 CNSCO VISTA 95% 93% 90% 88% 80% USER 85% OFF 95% 93% 90% 88% 80% USER 85% NORMAL HALF BLACK OFF ON Description Turns the MARKER setting on and off. MARKER disabled MARKER available Selects/displays the 16:9 marker type. No marker display 4:3 marker 13:9 marker 14:9 marker CNSCO marker VISTA marker 95% area marker 90% area marker 80% area marker 93.1% area marker (TYPE1) 93% area marker (TYPE2) 89.5% area marker (TYPE1) 88% area marker (TYPE2) This area marker can be varied in 1% increments in the range between 80% to 100%. However, an 88% value for a TYPE1 MARKER TYPE indicates an area marker whose height is 89% of available screen height in the selected aspect ratio. (The factory default is 85%.) Selects/displays the 4:3 marker type. No marker display 95% area marker 93% area marker 90% area marker 80% area marker 89% area marker (TYPE1) 88% area marker (TYPE2) This area marker can be varied in 1% increments in the range between 80% to 100%. Values of 93% and 88% for TYPE1 MARKER TYPE indicate area markers whose height is 93.1% and 89.5%, respectively, of available screen height in the selected aspect ratio. (The factory default is 85%.) Selects the background brightness around the marker. Normal background 50% background brightness 0% background brightness (black) Displays/turns off the center marker. Turns the display off Turns the display on *1 This setting is turned "ON" when receiving marker control in REMOTE operation. (GPI, if set, has priority.) *2 These settings are disabled when the GPI function (J page 53) is used to control the marker setting. They are also disabled in split screen mode. *3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode. *4 TYPE1 and TYPE2 area marker size depends on the "MARKER TYPE" setting (J page 26). 25