Panasonic CF-29CRKGZKM Service Manual - Page 52
Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame
UPC - 092281833422
View all Panasonic CF-29CRKGZKM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7.2.16. Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame 1. Connect the three Cables to the three Connectors (CN930, CN950, CN952) on the KBD PCB. 2. Fix the KBD PCB using the two Screws. No1, No2 3. Connect the Cable to the Connector (J2) on the MDC Modem. 4. Attach the Sheet to the MDC Modem. 5. Fix the MDC Modem using the two Screws. No3, No4 6. Attach the LCD Conductive Sheet and the Gasket to the LCD Cable/MIC Frame. 7. Set the LCD Cable/MIC Frame to the Top Cabinet. :No2 Connector J1 Connector CN950 (reverse side) (front side) :No1 :No3 Connector CN952 (reverse side) :No4 Sheet MDC Modem KBD PCB Connector CN930 (reverse side) Connector J2 (reverse side) to Connector (CN950) Gasket to Connector (CN952) Note: Tighten the Screws in the numbered order (No1 to No4). Top Cabinet LCD Conductive Sheet Screws : DFHE5025XA Screws : DFHE5025XA LCD Cable/ MIC Frame n Attaching the Sheet to the MDC Modem 1. Connect the Cable to the Connector (J2) on the MDC Modem. 2. Attach the Sheet to the MDC Modem. Safety Working MDC Modem View "A" to Connector (CN930) to Connector (J2) Place the Cable not to pass through this range. MDC Modem Connector (J2) Cable View "A" 5~7mm Sheet 3~4mm Connector (J2) Cable Sheet 7-34