Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 103

Technical information ■■Cable specifications (When connected to a personal computer) Projector 1 NC 2 3 4 NC 5 6 NC 7 8 9 NC NC 1 2 3 NC 4 5 NC 6 7 8 NC 9 PC (DTE) ■■Control commands Commands available when controlling this projector from a computer are as follows. Command Control contents Remarks PON POF POWER ON POWER OFF In standby mode, all commands other than the PON command are ignored. The PON command is ignored during lamp on control. zzIf a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on unless approximately 85 seconds have passed in order to protect the lamp. Parameters IIS SWITCH INPUT CP1 = COMPONENT IN SVD = S-VIDEO IN VID = VIDEO IN HD1 = HDMI 1 IN HD2 = HDMI 2 IN HD3 = HDMI 3 IN RG1 = COMPUTER IN OMN MENU Displays the main menu. OEN ENTER Activates the selected items in the menu mode. OBK RETURN Returns to the previous menu or escaping from the menu mode. OCU OCD OCL OCR Navigation buttons OCU = ▲ cursor OCL = ◄ cursor OCD = ▼ cursor OCR = ► cursor OLE LENS Displays the test patterns for adjusting [ZOOM/FOCUS]. ([RETURN] or [MENU] when finishing) OST OFZ DEFAULT FREEZE Resets to the factory default setting. ( page 33) Freezes the projected screen. ( page 83) 0 = OFF, 1 = ON FC1 FUNCTION BUTTON Activates the function allocated to the button of the remote control. OSH BLANK Turns off the projection temporarily. Sends the command to switch between ON and OFF. ( page 83) Do not rapidly switch between ON/OFF. While the BLANK function is ON, it is switched OFF when any command is received. OVM OMM PICTURE MEMORY LOAD Activates the [PICTURE] menu. Send the command to switch menu items. ( page 40) Displays the [MEMORY LOAD] menu. OWM WAVEFORM Parameter 0 = OFF 1 = FULL SCAN(Y) 2 = FULL SCAN(R) 3 = FULL SCAN(G) 4 = FULL SCAN(B) 5 = SINGLE LINE SCAN(Y) 6 = SINGLE LINE SCAN(R) 7 = SINGLE LINE SCAN(G) 8 = SINGLE LINE SCAN(B) VS1 VPM ASPECT PICTURE MODE Switches the aspect ratio. Aspect ratio is switched each time this command is sent. ( page 61) Switches the [PICTURE MODE]. ( page 40) Parameter NOR = NORMAL DYN = DYNAMIC 709 = REC709 DCN = D-CINEMA CN1 = CINEMA1 CN2 = CINEMA2 GM1 = GAME DPA PICTURE ADJUST Displays the individual adjustment screen of the [PICTURE] menu operated immediately before this operation. DCM COLOR MANAGEMENT Displays the [COLOR MANAGEMENT] menu. OVL VIERA LINK Displays the [VIERA LINK] menu. OSM SUB MENU Displays the SUB MENU of the connected equipment, when [VIERA LINK SETTING] - [VIERA LINK] is [ON], and the "VIERA Link" compatible device and CEC-compatible equipment of other manufacturers is connected. For details on the CEC-compatible equipment of other manufacturers, see page 97. Appendix ENGLISH - 103