Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 71
[3D VIEWING MONITOR], Press the ▲▼ buttons to select
View all Panasonic Full HD 3D Home Theater Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
[3D SETTINGS] menu [3D VIEWING MONITOR] In the 3D video the depth of field effects in front of and into the screen are adjusted while confirming on the monitor display. 1) Press the ◄► buttons to select [MODE1] - [MODE3], and press the button. zzThe parallax adjustment monitor is displayed. The display content of each mode is described below. 2) Press the ▲▼ buttons to select the optimum parallax. zzPress the button to return to pre-adjustment settings. zzPress the button to freeze and unfreeze. 3) Press the button. 4) When you have finished making adjustments, press the button to return to [3D SETTINGS]. The display content of each mode in the parallax adjustment monitor is as follows. [Mode1] [Mode2] [Mode3] Displays the parallax of the entire image at the bottom of the projection screen. Displays the maximum parallax of the entire image in one dimension. Displays the parallax of the entire image by superimposing on the image. (The image is in monochrome signals, and only the parallax is colored.) The lines on the parallax adjustment monitor in [Mode1] display the following content: White (dashed line) Blue Red White (solid line) Default display for video without parallax Displays the into screen parallax Displays the in front of screen parallax Displays an estimate for parallax of general 3D video Into screen parallax In front of screen parallax ADJUSTƷƷENTER : APPLYƷƷDEFAULT : RESETƷƷFUNCTION : FREEZE This indicates the maximum estimate into screen parallax while measuring. Reference line This indicates the maximum estimate  in front of screen parallax while measuring. * The illustration shown here depicts how an image is projected. Attention zzIf the red line of the in front of screen parallax descends below the area demarcated by the reference line (white dashed line) and the lower maximum line (white solid line), or if the blue line of the into screen parallax ascends above the area demarcated by the reference line (white dashed line) and the upper maximum line (white solid line), then make sure to watch from a large enough distance from the screen or stop watching. For explanation about each line, refer to the following explanation for [Mode 1]. Settings ENGLISH - 71