Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 79

[OPTION] menu [TRIGGER 1/2 SETTING] You can set the function for each trigger terminal. The trigger terminals for this projector are used as both the input/output terminal for the trigger function and the output terminal for the external 3D IR Transmitter (optional accessory). This is selected with a menu. Attention zzYou can connect a maximum of two external 3D IR Transmitter (optional accessory). zzMake sure the switch of the projector is turned before a cable is connected to or disconnected from a trigger terminal. ■■[OUTPUT] In conjunction with projector operation set in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger output signal is sent to an external device with a trigger terminal to enable control. ■■[INPUT] Receipt of a trigger input signal from an external device enables control of projector operation setup in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu. 1/2 ON-SCREEN DISPLAY PICTURE BACK COLOR BLUE STARTUP LOGO ON POSITION AUTO SEARCH ON HDMI SIGNAL LEVEL NORMAL LANGUAGE FRAME RESPONSE NORMAL PROJECTION METHOD FRONT/DESK 3D SETTINGS TRIGGER 1 SETTING OFF TRIGGER 2 SETTING OFF LENS CONTROL SLEEP OFF HIGH ALTITUDE MODE OFF OPTION LAMP POWER NORMAL FUNCTION BUTTON VIERA LINK SETTINGS 1) Use the ▲▼ buttons to select [TRIGGER 1 SETTING] or [TRIGGER 2 SETTING] and press the button. zzThe [TRIGGER SETTING] menu is displayed. PICTURE POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION TRIGGER 1 SETTING OFF OUTPUT POWER ON SELECT LENS MEMORY 1 SELECT LENS MEMORY 2 SELECT LENS MEMORY 3 SELECT LENS MEMORY 4 SELECT LENS MEMORY 5 SELECT LENS MEMORY 6 BLANK DELAY TIME INPUT POWER ON/OFF 3D SHUTTER OUT SELECT 4:3 ASPECT SELECT 16:9 ASPECT SELECT S16:9 ASPECT SELECT JUST ASPECT SELECT ZOOM ASPECT SELECT H-FIT ASPECT SELECT V-FIT ASPECT RS-232C COMMAND LINK 0 SEC. BLANK 2) Press the buttons to select the input/output function and press the button. zzFunction settings [OFF] Unable to transmit the trigger output signal. Does not function even if trigger input signal is received. (Trigger input signal can be received.) An external 3D IR Transmitter (optional accessory) will not operate even if connected. [3D SHUTTER OUT] Select this for connecting and use of an external 3D IR Transmitter (optional accessory). Note zzRead the operating instructions for the external 3D IR Transmitter (optional accessory) when using a 3D IR Transmitter. zz Output [POWER ON] [SELECT LENS MEMORY 1] [SELECT LENS MEMORY 2] [SELECT LENS MEMORY 3] [SELECT LENS MEMORY 4] [SELECT LENS MEMORY 5] [SELECT LENS MEMORY 6] [BLANK] [SELECT 4:3 ASPECT] [SELECT 16:9 ASPECT] [SELECT S16:9 ASPECT] [SELECT JUST ASPECT] [SELECT ZOOM ASPECT] [SELECT H-FIT ASPECT] [SELECT V-FIT ASPECT] [RS-232C COMMAND LINK] When the item which is set in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu is chosen or executed in the projector, 12 V is output from a trigger terminal. Note zzWhen [AUTO] is selected in the [ASPECT] menu of [POSITION], video is automatically displayed using either 4:3 or 16:9 aspect ratio depending on the input signal, so if this aspect ratio matches the settings made in [TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS] 12 V is output. Settings ENGLISH - 79