Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 75

■■[LENS MEMORY NAME CHANGE] 1) Press the ▲▼ buttons to select the memory name to be changed. PICTURE POSITION LANGUAGE 3D SETTINGS LENS MEMORY NAME CHANGE LENS MEMORY1 LENS MEMORY2 LENS MEMORY3 LENS MEMORY4 LENS MEMORY5 LENS MEMORY6 LENS CONTROL OPTION 2) Press the button. zz[LENS MEMORY NAME INPUT] screen is displayed. LENS MEMORY NAME INPUT [LENS CONTROL] menu [AUTO SWITCHING] This function automatically identifies wide signal*1 or 16:9/4:3 and automatically recalls memory settings that have been set for each screen size. *1 : Wide signals are 2.35:1, 2.40:1, 2.50:1, 2.55:1 aspect signals. AUTO SWITCHING PICTURE 2.35:1 IMAGE DETECTION OFF 16:9 IMAGE DETECTION OFF POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION ABCDEF GHI J KL M N O P Q R S T U V WX Y Z abcdef ghi j kl m n o p q r s t u v wx y z 1234567890 SPACE ALL DELETE OK CANCEL 3) Press the buttons to specify the location of the required character to enter and press the button. zzYou can enter up to 16 characters. zzSelect [ALL DELETE] and press the button to erase all input text. If you press the button on the remote control, you can erase the character currently selected by the cursor in the input box. 4) Press the buttons to select [OK]. 5) Press the button. Note zzPress the button without entering any text to keep the default name ([LENS MEMORY 1] - [LENS MEMORY 6]). 1) Press the ▲▼ buttons and select the item for automatic identification. 2) Press the ◄► buttons to select your required lens memory for automatic identification. zzThe [LENS MEMORY] setting which has been selected for [2.35:1 IMAGE DETECTION] is loaded after a given period of time once the input signal switches from 16:9/4:3 to 2.35:1. zzThe [LENS MEMORY] setting which has been selected for [16:9 IMAGE DETECTION] is loaded after a given period of time once the input signal switches from 2.35:1 to 16:9/4:3. zzIf [OFF] is selected, automatic identification will not be performed. zzThis function is not available when [ZOOM] or [V-FIT] is selected from the [ASPECT] menu. Note zzIf the lens memory is not registered using [LENS MEMORY SAVE], you cannot select [AUTO SWITCHING]. zzWhen displaying the menu or test pattern, automatic identification is not performed. zzImage size may not be correctly recognized if there is noise in the picture or external device generates noise. Image size may also not be correctly recognized depending on the video. zzImage size may not be correctly recognized if the input signal level from the external device is not set to the suggested value range. In this case, adjust the input signal level using the [WAVEFORM MONITOR] menu. ( page 41) zzImage size may not be correctly recognized if the screen position is not correctly adjusted. In this case, adjust the screen position using the [POSITION] menu. ( page 60) zzDuring the display of 3D images, you cannot use [AUTO SWITCHING]. Settings ENGLISH - 75