Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 43
Adjust [full Scang] / [single Line
View all Panasonic Full HD 3D Home Theater Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
▲ ▼ Settings 1) Adjust [FULL SCAN(Y)] / [SINGLE LINE SCAN(Y)]. ▲ ▼ zzSet on [PICTURE] and use the buttons to adjust [BRIGHTNESS] and then [CONTRAST]. [BRIGHTNESS] [CONTRAST] Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) zzSetting range: −32 to +32 Adjust the top line of the waveform to 100 % (100 IRE) zzSetting range: −64 to +64 ▼ ▲ 2) Adjust [FULL SCAN(R)] / [SINGLE LINE SCAN(R)]. zzSet on [ADVANCED MENU] and use the buttons to adjust [BRIGHTNESS R] and then [CONTRAST R]. [BRIGHTNESS R] [CONTRAST R] Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) zzSetting range: −16 to +16 Adjust the top line of the waveform to 100 % (100 IRE) zzSetting range: −32 to +32 ▼ ▲ 3) Adjust [FULL SCAN(G)] / [SINGLE LINE SCAN(G)]. zzSet on [ADVANCED MENU] and use the buttons to adjust [BRIGHTNESS G] and then [CONTRAST G]. [BRIGHTNESS G] [CONTRAST G] Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) zzSetting range: −16 to +16 Adjust the top line of the waveform to 100 % (100 IRE) zzSetting range: −32 to +32 [PICTURE] menu 4) Adjust [FULL SCAN(B)] / [SINGLE LINE SCAN(B)]. zzSet on [ADVANCED MENU] and use the buttons to adjust [BRIGHTNESS B] and then [CONTRAST B]. [BRIGHTNESS B] [CONTRAST B] Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) zzSetting range: −16 to +16 Adjust the top line of the waveform to 100 % (100 IRE) zzSetting range: −32 to +32 Note zzWhen a 3D signal is being input (including converting 2D to 3D), the [WAVEFORM MONITOR] cannot be executed. ENGLISH - 43