Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 32

RReemmoteoctoentcrool onpterroatlioon peration Selecting the picture mode You can switch to your desired picture mode settings. Press The settings change as follows each time the button is pressed. [NORMAL] [DYNAMIC] [REC709] You can operate the projector with the remote control within a range of 7 m (23'). zzOperating by pointing at the projector Ensure the remote control transmitter is facing the remote control signal receiver on the front of the projector during use. zzFacing to the screen Ensure the remote control transmitter is facing the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen. Note zzDo not let strong light shine onto the signal receiver. The remote control may malfunction under strong light such as fluorescent light. zzIf there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly. zzWhen viewing 3D images the remote control may not respond well in some cases. Managing the lens control settings You can display [ZOOM/FOCUS] test pattern 1 and adjust the projection video size and focus. If you have saved lens memory settings in [LENS MEMORY SAVE], press the button twice to display [LENS MEMORY LOAD] menu. Press Note zzFor details regarding the adjustment method, see [ZOOM/ FOCUS] in the [LENS CONTROL] menu. ( page 73) [GAME] [CINEMA2] [CINEMA1] [D-CINEMA] Note zzYou can also switch the picture mode settings using the on-screen menu. For details see [PICTURE MODE] in the [PICTURE] menu. ( page 40) Adjusting the picture Switchable setting items from the [PICTURE] menu of the on-screen menu can be displayed in a list. Press Press the button to switch between [PICTURE] menu and [ADVANCED MENU] menu. Press ▲ ▼ to select the required menu item and ◄ ► to adjust. zz[PICTURE] menu items [PICTURE MODE], [CONTRAST], [BRIGHTNESS], [COLOR], [TINT], [COLOR TEMPERATURE], [SHARPNESS ] and [DYNAMIC IRIS] zz[ADVANCED MENU] menu items [GAMMA HIGH], [GAMMA MID], [GAMMA LOW], [CONTRAST], [BRIGHTNESS], [NR], [MPEG NR], [FRAME CREATION], [x.v.Color], [DETAIL CLARITY], [CINEMA REALITY], [SUPER WHITE], [TV-SYSTEM], [RGB/YCBCR] and [RGB/YPBPR] Note zzFor details regarding the adjustment method, see the [PICTURE] menu ( page 40) and the [ADVANCED MENU] menu ( page 45). zzPress the or button or wait for 7 seconds without performing any operation to clear the adjustment screen. zzSet the [ADJUSTMENT MODE] to [SIMPLE] for adjusting [GAMMA HIGH], [GAMMA MID], and [GAMMA LOW] ( page 50). zzThe items for [SHARPNESS] that can be adjusted differ depending on the [ADJUSTMENT MODE]. [SIMPLE]: [SHARPNESS] [ADVANCED]: [H-SHARPNESS] [V-SHARPNESS] Basic Operation 32 - ENGLISH