Panasonic Full HD 3D Home Theater Projector Operating Instructions - Page 76
[h-area Position], [v-area Position], [left Masking Area], [right Masking Area], [upper Masking Area
View all Panasonic Full HD 3D Home Theater Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
[LENS CONTROL] menu [H-AREA POSITION] You can move the frame area horizontally, such as aligning the right or left frame edge to the screen edge. Moving left Moving right For example, when projecting an overscanned 16:9 projection area at a 4:3 aspect ratio on a 4:3 aspect screen, you can adjust the horizontal discrepancy between the screen position and the video display position. 16:9 projection area 4:3 screen [RIGHT MASKING AREA] You can place a blank (mask) area in the right side edge on the screen. Less More zzSetting range: 0 to 70 [UPPER MASKING AREA] You can place a blank (mask) area in the upper side edge on the screen. Less More Settings  4:3 video display position [V-AREA POSITION] You can move the frame area vertically, such as aligning the top or bottom frame edge to the screen edge. Moving downward Moving upward For example, when projecting an overscanned 16:9 projection area at a 2.35:1 cinema scope screen movie on a 2.35:1 size cinema scope screen, you can adjust the vertical discrepancy between the screen position and the video display position. 2.35:1 cinema scope screen 16:9 projection area size video display position zzSetting range: 0 to 70 [LOWER MASKING AREA] You can place a blank (mask) area in the lower side edge on the screen. Less More zzSetting range: 0 to 70 Note zzIf it is set to [0], each masking function will be invalid. zzThe [MASKING AREA] function will be invalid when adjusting the [COLOR MANAGEMENT] or [SPLIT ADJUST] settings, when displaying the [TEST PATTERN] or [WAVEFORM MONITOR], or when no signal is detected. zzDuring the display of 3D images, you cannot use [LEFT MASKING AREA], [RIGHT MASKING AREA], [UPPER MASKING AREA], [LOWER MASKING AREA]. 2.35:1 cinema scope screen [LEFT MASKING AREA] You can place a blank (mask) area in the left side edge on the screen. Less More zzSetting range: 0 to 70 [PROCESSING MESSAGE] You can set whether to show or hide the execution message during switching of lens settings. Switch settings Switch settings [ON] [OFF] Show the execution message Hide the execution message 76 - ENGLISH