Panasonic KXTG1031 Expandable Digital Cordless Ans System - Page 9

Preparation Setting up the base unit Connecting the AC adaptor and telephone line cord Connect the telephone line cord until it clicks into the base unit and telephone line jack (A). Connect the AC adaptor cord (B) by pressing the plug firmly (C). L Use only the included Panasonic AC adaptor PQLV219. B A (120 V AC, 60 Hz) If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: - Noise is heard during conversations. - Caller ID features do not function properly. To single-line telephone jack (RJ11C) Noise filter C Hook To single-line telephone jack (RJ11C) Note: L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floormounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. L The unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 5). Setting up the handset Connecting the AC adaptor Available for: KX-TG1032/KX-TG1033/KX-TG1034/ KX-TG1035 L Use only the included Panasonic AC adaptor PQLV219. (120 V AC, 60 Hz) Bottom of the charger Hooks Hooks Fasten the AC adaptor cord to prevent it from being disconnected. For assistance, please visit http://www.panasonic.com/help 9