Panasonic PT-D4000U Operating Instructions - Page 46
Using the PJLink, protocol - lamp reset
UPC - 791871111529
View all Panasonic PT-D4000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using the PJLink™ protocol The network functions of the projector are compatible with PJLink™ Class 1. The operations mentioned below can be performed from a personal computer using the PJLink™ protocol. • Projector settings • Projector status inquiry Supported commands The commands for controlling the projector using the PJLink™ protocol are as given in the table below. Command Control Description POWR Power control POWR ? Power status inquiry INPT Input selection INPT ? Input selection inquiry AVMT Shutter control AVMT ? Shutter status inquiry ERST ? Error status inquiry Remarks Parameter 0 = Standby 1 = Power "ON" Parameter 0 = Standby 1 = Power "ON" 2 = Cooling down 3 = During warm-up Parameter 11 = RGB1 12 = RGB2 21 = VIDEO 22 = S-VIDEO 31 = DVI-D Parameter 30 = Shutter mode OFF (Mute reset of video) 31 = Shutter mode ON (Mute video) Parameter 1st byte: Refers to fan error; one of 0 to 2 2nd byte: Refers to lamp error; one of 0 to 2 3rd byte: Refers to temperature error; one of 0 to 2 4th byte: Refers to cover open error; one of 0 to 2 5th byte: Refers to filter warning; one of 0 to 2 6th byte: Refers to some other error; one of 0 to 2 LAMP ? Lamp status inquiry INST ? NAME ? INF1 ? INF2 ? INFO ? CLSS ? Input selection list inquiry Projector name inquiry Manufacturer's name inquiry Model name inquiry Other information inquiry Class information inquiry The meaning of 0 to 2 is as given below. 0 = Error not detected 1 = Warning 2 = Error Parameter First number (digits 1 to 5): Lamp1 cumulative time Second number: 0 = Lamp1 OFF; 1 = Lamp1 ON Third number (digits 0 to 5): Lamp2 cumulative time Fourth number: 0 = Lamp2 OFF; 1 = Lamp2 ON Parameter responds with following values: "11 12 21 22 31" Responds with the name set in "HOST NAME" of "NETWORK" Responds with "Panasonic" Responds with "D4000" Responds with version number and so on Responds with "1" PJLink™ security authentication The password used for PJLink™ is the same as the password set for WebBrowser control. When using these commands without authentication, leave the WebBrowser control password unspecified. • PJLink™ is a pending trademark in Japan, the United States and other countries and regions. For details on PJLink™ specifications, refer to the Japan Business Machine and Information System Industries Association website. The URL is http://pjlink.jbmia.or.jp/english/ 46