Panasonic PT-D4000U Operating Instructions - Page 59

Dimensions 478.5 (18 27/32) unit : mm, ( ) : inch R30 R/PR G/Y B/PB SYNC/HD VD Ins;VIDEO IN S-VIDEO IN REMOTE 1 86.5 (3 13/32) 157 (6 3/16) 167 (6 12/64) IN OUT RGB 1 IN REMOTE 2 IN RGB 2 IN IN SERIAL OUT DVI-D IN LAN >PC< TBMU448 436 (17 11/64) 530 (20 55/64) 368 (14 31/64) 425 (16 47/64) 441 (17 23/64) 4 (5/32) 12 (15/32) tallation dimensions diagram (Figure 1 : Dimensions applying when one unit is used) (Figure 2 : Dimensions applying when two units are used) ; Exhaust 50 cm (19.7") or more 30 cm (11.8") or more 30 cm (11.8") or more Exhaust 50 cm (19.7") or more 50 cm (19.7") or more Exhaust 50 cm (19.7") or more 10 cm (3.9") or more ;Attention • Leave a clearance of at least 50 cm (19.7") so that the ventilation opening on the rear panel will not be blocked. • Be careful not to retain exhausted air on the back side of the main unit. Also take steps to ensure that the hot air blown out from the air exhaust outlet will not be sucked into the air intake. • Install with clearances of at least 30 cm (11.8") provided for the side panels to enable the air filter to be removed and re-installed. • When operating the projector in an enclosure, ensure that the temperature of the surrounding air within the enclosure remains within the range 0 °C to 40 °C while the projector is running. Also ensure that the air intake and exhaust vents are unobstructed. Even when the surrounding air temperature is maintained below 40 °C, operation of the protection circuit could cause a shutdown due to hot exhaust air being trapped inside the projector. When designing the enclosure, please give due consideration to the thermal environment surrounding the projector (Figure 2). 59