Panasonic PT-D6000ULK Operating Instructions - Page 13

Preparation J Side views S-VIDEO IN Connect an S-VIDEO signals. (Mini DIN 4 pin) VIDEO IN Connect a video signals. (BNC) LAN Connect a LAN cable for network connection. (10BASE-T/100BASE-TX) About Your Projector RGB 1 IN Connect an RGB or YPBPR signals. (3, 4 or 5 wire BNC) RGB 2 IN Connect an RGB or YPBPR signals. (D-SUB 15 pin female) DVI-D IN Connect a single link DVI-D signals. REMOTE 1 IN/OUT Connect a cable from the remote control or another projector. (M3 jack) REMOTE 2 Connect a cable from an external control circuit. (D-sub 9 pin female) SERIAL IN/SERIAL OUT SDI IN (PT-DZ6710U only) Connect an RS-232C cable Connect a cable from a from/to a computer. computer. Air intake port Air intake port POWER button Switch the projector on/off. (page 20) AC IN terminal Connect the power cord to supply electronic power to the projector. (page 20) Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System. Auto Cleaning Filter (ACF) compartment (page 31) NOTE: • Switch on the POWER button of the projector body that is located near the terminals before using the control buttons. • Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury. ENGLISH - 13