Panasonic PT-D6000ULK Operating Instructions - Page 18

Power cord, Setting up, Connecting

Page 18 highlights

Getting Started Setting up Power cord J Connecting 1. Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in. J Disconnecting 1. Unplug the power cord from the wall outlet. 2. Depress the latch and slide the cover off. 2. Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in. Latch 3. Slide the power cord secure lock up along the side guide rail and remove. Rail guide Rail guide 3. Place the latch to the latch catcher and press until it clicks. 4. Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector. Power indicator lights in orange if the internal cooling fan is still operating by internal power supply. Latch 4. Connect the power cord to a wall outlet. NOTE: • Do not use other than the provided power cord. • Ensure all the input devices are connected and turned off before connecting the power cord. • Do not force the connector as this may damage the projector and/or the power cord. • Dirt or dust build-up around plugs may cause fire or electrical hazards. • Switch off the power to the projector when not in use. • If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection. ENGLISH - 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

Getting Started
Setting up
E
NGLISH - 18
Connecting
1.
Make sure the shape of the power plug and the
AC IN
terminal on the back of the projector match, then push
the plug all the way in.
2.
Align the side of the power cord secure lock with the side
guide rail of the
AC IN
terminal of the projector and slide
it in.
3.
Place the latch to the latch catcher and press until it
clicks.
4.
Connect the power cord to a wall outlet.
Disconnecting
1.
Unplug the power cord from the wall outlet.
2.
Depress the latch and slide the cover off.
3.
Slide the power cord secure lock up along the side guide
rail and remove.
4.
Hold the plug and unplug the power cord from the
AC IN
terminal on the back of the projector.
Power indicator lights in orange if the internal cooling fan is
still operating by internal power supply.
Power cord
Rail guide
Latch
Latch
Rail guide
NOTE:
Do not use other than the provided power cord.
Ensure all the input devices are connected and turned off before connecting the power cord.
Do not force the connector as this may damage the projector and/or the power cord.
Dirt or dust build-up around plugs may cause fire or electrical hazards.
Switch off the power to the projector when not in use.
If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start
the projection.