Panasonic VDR M70 Operating Instructions - Page 120

iffitiansing uvu ktAM uIse or tiara (tormat Disc/Format Gard) Before You Begin hike great care hint power is not turned off during initialization. It the DVD video cemera/recorder is turned on during initialiaiti0U Me initialization is interrupted. incorrect initialization will result. and at worst. the data recorded on disc or card may he damaged. 1 Press the DISC NAVIGATION button. 2 Press thn MENU button. 3 Choose "I ormat Disc" or "I ennui. Card- on the "Disc" or "Card" menu screen, and then press the o•/Il button. -rho screen Ion verifying "I orrnat I.:)isc" or "Format Card" will appear. 4 Choose "YES". and then press the ►/U button. Choose "NO" to cancel init ialisation. (When using DVD-RAM disc) (When using Card) N()1(): I, uhi,. li,3ation will clelete all Mc leCCH dec., col -FM/its oi l GIGO or card: Be ciirolul not to delete data by mistake. • Be sure to use the AC adaptor/Alarger when initialising disc or card so that the DVD video camerairecorclor is not turned off midway. It initialisation is interrupted by power oft. the disc or card will not be initialised correctly, or it may be damaged. • It may not he possible to initialise a disc with many scratches or dirt: Such a disc cannot be used. • If you use a brandnew DVD-H disc. message "Disc isnot fen-ratted" will appear: initialise the disc, following the subsequent messages (See page 46) . • This DVD video camera/recorder may not recognise some discs or cards that have been initialised on PC or a device other than this DVD video camera/recorder. • It you attempt to initialise a disc or card in this DVD video camera/recorder when it is connected to PC via US1,3 cable. the disc or card may not be initialised and may be unusable on this DVD video camera/recorder. ES p When initialising one side of the disc is complete, the DVD video camera/recorder will return to the recording pause status.