Panasonic VDR M70 Operating Instructions - Page 144

Control Informat ion Error. Mismatch may occur between iho recorded image and scene information. Update the control inter malice. • Use another disc. • Sioe `3 on page 147 COPY PAO [LC LIJ The video signal input to this DVD video csamerairecorder may he uopyquarded. Sulx C? prerecordod video materials;. such as movier.. WC qu~,rdcd against copying. Copy-guarded materials cannot be recorded or this DVD video ca mera/recordoi DISC ACCESS he recorded scene is being stored oil disc. Wail until the rriessade disappears. and you can start to usr; the DVD video camera/recorder. s I)VD video camera/recorder is verifying whether the correct disc has been inserted. Wait until the message disappears. and you can start to use the DVD video camera/recorder. This message will he displayed for a little longer when the dale changes. DISC ALMOST FULL The disc will soon be lull . and recording will he impossible. Delete unnecessary scenes and try the disc again. or use a nolher disc. Ilse error has occurred inalising is not complete. • Disc error occurred during finalisinc ❑nd finalising failed. Replace the disc. • See '3 on I .l )isc error has occurred oi inat the disc now? • Has the disc been init ialised on PC'? I las initialising the disc on PC been interrupted'? Choose "YES- and initialise the disc when using it on this DVD video camera/recorder. initialising the disc will erase all data on it. • See '2 on page 147. Disc error has occurred Formatting is not complete. The disc may be dirty. Remove the disc and wipe off fingerprints, dust, etc. before reusing it. or use another disc. This message may also appear if you insert a disc for which formatting was interrupted midway. In this case. use another disc. Disc error has occurred Keep disc inside & restart. Disc error could have occurred during editing of scenes. burn off the DVD video camera/recorder with the disc being used in il, connect AC adapter/charger. and then power the DVD video cainorairecorder again. Repair of scenes will be tried. Disc error. • Use another disc. See *3 on page 147. . Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/recorder. initialise the disc or use another disc. • initialising the disc will erase all data on it. "DISC ERROR" appears when an attempt to release write-protect is made. If you have write-protected a disc using the write-protect setting tool (WPTOOL) that is equipped with the DVD-RAM driver contained on the CD-ROM provided with this DVD video camera/recorder, you cannot release the write-protect on this DVD video carnera/ recorderas is. Use the write-protect setting tool on PC to release the write-protect. Disc full. Cannot execute. Delete unnecessary scenes before using this disc, or use another disc. Disc has no data. This message will appear when an attempt is made to execute playback or editing on Disc Navigation with no scene recorded. 121 26.21 50. 51 3 1 . 32. 96 122 120 29. 120 44 26. 27 120 96 A A di