Panasonic VDR M70 Operating Instructions - Page 77

Using the Image Stabiliser (SIS) I his DVD video camera/recorder is equipped with nn image P,Inhilir,or function: When you use zoom to record a magnified subject itaajje, it will correct fuzziness in the recorded i.nage. 1 I 'fess the MENU button. choose "SIS" on the "Camera [Unctions Setup" menu screen and then press the Hutton. 2 Choose the "On" or "Off". and then press the button. 3 Press the MENU button to end the setting. I Checking SIS On or Off You can check SIS On or Off by the oi i-screen information display. SIS 12bni Oil n Go on HP" 3 3 133ii 0333 After recording with SIS set to "Off", it is recommended that you return the setting to -On" and then turn the DVD video camera/recorder off, unless you normally record with "Off' setting. This function is effective only during movie recording: It will not work during still recording. Note: • The SIS setting will be stored in memory even when the DVD video camera/recorder is turned off. • Although you can switch SIS between on and off during still recording. the setting will be effective only during movie recording. • It is recommended that you specify "SIS Off" when using the DVD video camera/recorder on a desk or tripod. • When "SIS On" is specified, there will be a slight difference between the actual movement and the movement on screen. • Gross camera shake may not be entirely corrected even if "SIS On" is specified. Firmly hold the DVD video camera/recorder with both hands. • SIS may not operate correctly when the tele or wideconversion lens (generally available) is used. EIS cannot be used when recording stills on VDIMM70.