Panasonic VDR M70 Operating Instructions - Page 147

Message Cause & Troubleshooting iso AC adapter/ charger. Turn off power. Scene cannot he repaired when the DVD video camera/recorder is powered by a battery. If the AC adapter/charger is unavailable in handy place, remove the disc. use the opposite side. or use another disc. To repair the removed disc, insert the disc into the DVD video camera/recorder afterwards, and conned the AC adapter/charger. VIDF.O scene cannot be No movie can be copied to card. copied to card. Select stills and copy them to card. Write protected. Check card. Write protected. Check disk. • A locked card or write-protected disc is inserted. • Release the lock or write-protect using the Card or Disc Navigation menu. Reference PAP 44 103 30, 119 *1 • This message may also appear when dirt adheres to disc. If this message appears when a recorded disc is recognised immediately after it is inserted, do not repair the disc; remove it and then use a soft, dry cloth to clean off the dirt before using it. • This message may also appear when condensation occurs. In this case, do not repair the disc; turn the DVD video camera/recorder off, wait until it dries out, and then turn it on again. • If the repair message appears when you turn the DVD video camera/recorder on from off with a disc loaded alter recording on it. choose repair. • If the repair message appears when recording and playback are normally possible with another disc and no condensation occurs and the disc is not dirty - choose repair. *2 • This message may also appear when dirt adheres to disc. In this case, do not initialise the disc; remove it and then use a soft, dry cloth to clean the dirt before using it. • This message may also appear when condensation occurs. In this case, do not initialise the disc; turn the DVD video camera/recorder off, wait until it dries out, and then turn it on again. • Initialisation will delete all data on disc. *3 • This message may also appear when dirt adheres to disc. Remove the disc and then use a soft, dry cloth to clean the dirt before using it. • This message may also appear when condensation occurs. Wait until the DVD video camera/recorder dries out, and then turn it on again. • This message will appear when a single-sided disc is inserted in reverse. Reinsert the disc correctly. (Insert the disc with the label printed surface facing the outside.)