Philips WAS7500 User manual - Page 100

Preparation, Installation, Mounting Station, Important, To avoid the risk of injury and damage

Page 100 highlights

18.1.3 Preparation Try the necessary rear connections and the Wi-Fi connections between find a suitable location for installation/mounting (see 3 Installation). AND in order to Important! To avoid the risk of injury and damage to property as well as to the product: • Check for supply lines (gas, water, electricity, etc.) before drilling holes. • Assess the type of screws necessary to bear Station. • Choose the right drill and bit for the type of wall to drill the holes. • Take all other precautions to be observed when carrying out this type of mounting/installation job. 18.1.4 Mounting Station You can mount Station to the wall using the provided bracket. 1 Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions. 2 Drill the holes as marked. 3 Fix the bracket to the wall using suitable screws (not provided) and wall anchors (not provided) for all the holes provided in the wall mounting bracket. 4 Use a screwdriver and fasten the supplied screws to as shown. 5 Hook / mount in place as shown. 96 Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127

18.1.3 Preparation
Try the necessary rear connections and the Wi-Fi connections between
AND
in order to
find a suitable location for installation/mounting (see
3 Installation
).
18.1.4
Mounting Station
You can mount Station to the wall using the provided bracket.
1
Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions.
2
Drill the holes as marked.
3
Fix the bracket to the wall using suitable screws (not provided) and wall anchors (not provided)
for all the holes provided in the wall mounting bracket.
4
Use a screwdriver and fasten the supplied screws to
as shown.
5
Hook / mount
in place as shown.
Important!
To avoid the risk of injury and damage to property as well as to the product:
Check for supply lines (gas, water, electricity, etc.) before drilling holes.
Assess the type of screws necessary to bear Station.
Choose the right drill and bit for the type of wall to drill the holes.
Take all other precautions to be observed when carrying out this type of mounting/installation
job.
Appendix
96