Philips WAS7500 User manual - Page 79
Set IP Mode, Automatic, Set network on Station, If there is no DHCP, Static, 4 Prepare: Alphanumeric
UPC - 609585143814
View all Philips WAS7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6 In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic. ENGLISH * DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP addresses to devices on a network. 11.3.2 Set network on Station ( ) If there is no DHCP: 1 Select Static and assign an IP address and subnet mask as prompted, using the alphanumeric keys (see 4.4 Prepare: Alphanumeric keys). 2 As prompted, select YES to apply the settings. > is connected to the external wired network. On the display, the icon changes to . Applicable if you already have a wired home network (hub/switch/router). www Router Wired Tip You can connect or directly to your PC using the supplied Ethernet cable and the Wireless Audio Device Manager (WADM) in the supplied PC Suite CD. For details, see section 12 Connect to your PC. Network settings 75