Philips WAS7500 User manual - Page 78
key for the Wi-Fi network
UPC - 609585143814
View all Philips WAS7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
6 If you already know the WEP/WPA Use the 1-way remote control Press OK to key for the Wi-Fi network: to enter the WEP or WPA key. confirm. If there is no WEP/WPA key for the Press OK to skip. Wi-Fi network: 7 Select Automatic. 8 As prompted, select YES to apply the settings. is connected to the Wi-Fi home network. will be disconnected from the Wi-Fi network of . 11.3 Connect to wired home network The wired home network can be a single PC, a PC network, another or . and can both access the wired and wireless home network at the same time. Using the supplied Ethernet cable, you can connect or a separately to a wired network while maintaining its Wi-Fi connection (e.g. the Wi-Fi connection between and on or more , or the Wi-Fi connection with a home network). In this way, you can opt to play the music library of the wired network only on or a single (UPnP playback). At the same time, you can still enjoy all the music playback features on the Wi-Fi network. 11.3.1 Set network on Center ( ) 1 Check that the network device is switched on. 2 Connect supplied Ethernet cable to Ethernet ports on network device and . 3 Press MENU to enter the menu screen. 4 Use 3 or 4 and 2 to enter Settings followed by Network, then Wired. 5 Press 2 to continue. 74 Network settings