Philips WAS7500 User manual - Page 82
Set Gateway
UPC - 609585143814
View all Philips WAS7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
The following steps show how to get DNS and Gateway settings of the current network from the PC connected to the same network: 1 On your PC, click Start > Run 2 Type cmd and click OK 3 Type ipconfig/all 4 Write down the DNS and Gateway of the current connection. On 1 Press MENU to enter the menu screen. 2 Use 3 or 4 and 2 to enter Settings followed by Network, then Wired. 3 Press 2 to continue. Set DNS 1 Enter the DNS server you wrote down. 2 Press OK to confirm. 3 Press OK to skip Set DNS2. Tip If necessary, follow Steps 1 and 2 above to set a secondary DNS server in Set DNS2. Set Gateway 1 Enter the Gateway you wrote down. 2 Press OK to confirm. Set proxy 1 If you are using a proxy server to visit websites, enable Proxy and proceed with the proxy setting as prompted, then press OK to confirm Otherwise, press OK to skip. 2 Choose to apply the settings as prompted. > Settings will change. Connection to station could be lost appears. 78 Network settings