Philips WAS7500 User manual - Page 95
Sound skips during MP3/WMA
UPC - 609585143814
View all Philips WAS7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
ENGLISH Problem Solution Nothing appears on the synchronous You have switched on the set with the y button on display of the 2-way remote control the set and not the y button on the 2-way remote of even after the set is switched control. Press REFRESH on center's 2-way remote on. control to synchronize its display. The remote control does not • Reduce the distance between the remote control function properly. and the set. • Insert the batteries with correct polarity (+/- as indicated inside the compartment). • Replace the batteries. • Point the remote control directly towards the IR sensor. The screen of is stuck in a menu Please first try to press y to go to power-saving mode. or shows no response for a long If the problem persists, restart the power (disconnect period of time (2-5 minutes). and reconnect the mains plug) to reset . 'No Disc' / 'Cannot read CD' is displayed. • Insert a suitable disc. • Check if the disc is inserted with the graphics side (label) facing you. • Wait for the moisture condensation on the lens to clear. • Replace or clean the disc, see 1.5 Maintenance. • Use a finalized CD-RW or CD-R. Sound cannot be heard or is of poor • Adjust the volume. quality. • Disconnect the headphones. The disc skips tracks. • Switch off MUTE. • Replace or clean disc. Sound skips during MP3/WMA playback. • Switch off SHUFFLE. • The MP3/WMA file may be made at a compression level exceeding 320kbps. Use a lower compression level to rip audio CD tracks. • Replace or clean disc. Frequently asked questions 91