Pioneer DEH-P3100UB Owner's Manual - Page 25
Using the high pass filter, Boosting the bass, Adjusting source levels, Audio Adjustments
UPC - 012562943497
View all Pioneer DEH-P3100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Audio Adjustments Section 03 English # You can also perform the same operations by pushing MULTI-CONTROL up or down. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Use MULTI-CONTROL to select HIGH PASS FILTER. 2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the desired setting. Turn to change the setting. OFF-50HZ-63HZ-80HZ-100HZ-125HZ # You can also perform the same operations by pushing MULTI-CONTROL up or down. 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Boosting the bass Bass boost function boosts the bass level of sound. 1 Press and hold SW/BASS to display BASS BOOST setting mode. 2 Turn MULTI-CONTROL to adjust the level. 0 to +6 is displayed as the level is increased or decreased. # You can also perform the same operations by pushing MULTI-CONTROL up or down. 3 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Use MULTI-CONTROL to select SRC LV ADJUST in the audio function menu. 3 Press MULTI-CONTROL to display the setting mode. 4 Turn MULTI-CONTROL to adjust the source volume. +4 to -4 is displayed as the source volume is increased or decreased. # You can also perform the same operations by pushing MULTI-CONTROL up or down. 5 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Note The AM volume level can also be adjusted with source level adjustments. En 25