Pioneer DEH-P3100UB Owner's Manual - Page 39

Available accessories Section 06 English 2 Press MULTI-CONTROL to turn automatic call rejection on. # To turn automatic call rejection off, press MULTI-CONTROL again. Setting automatic answering 1 Use MULTI-CONTROL to select AUTO ANSWER in the function menu. 2 Press MULTI-CONTROL to turn automatic answering on. # To turn automatic answering function off, press MULTI-CONTROL again. Switching the ring tone 1 Use MULTI-CONTROL to select RING TONE in the function menu. 2 Press MULTI-CONTROL to turn the ring tone on. # To turn the ring tone off, press MULTI-CONTROL again. Echo canceling and noise reduction 1 Use MULTI-CONTROL to select ECHO CANCEL in the function menu. 2 Press MULTI-CONTROL to turn echo canceling on. # To turn echo canceling off, press MULTI-CONTROL again. XM tuner Listening to XM Satellite Radio You can use this unit to control an XM satellite digital tuner (GEX-P920XM), which is sold separately. For details concerning operation, refer to the XM tuner's operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner's operation manual. ! With this unit, you can operate two additional functions: XM channel direct selection and preset channel list. % Selecting an XM band Press BAND/ESC. # Band can be selected from XM1, XM2 or XM3. % Selecting a channel Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.) Switching the XM display % Press DISP/BACK/SCRL to switch the XM display. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. ! Six stations for each band can be stored in memory. 1 Press /LIST. Preset screen is displayed. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number. Press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # To return to the ordinary display, press BAND/ESC or /LIST. En 39