Pioneer DV-45A Owner's Manual - Page 64

08 The Initial Settings Menu CD Playback • Default setting: PCM Playback Initial Settings Digital Audio Out Video Output Language Display Options Speakers Parental Lock Bonus Group Auto Disc Menu Group Playback DVD Playback Mode SACD Playback CD Playback PCM Playback DTS CD Playback When set to PCM Playback, playback is optimized for standard audio CDs. You can also play DTS CDs, however you may notice some noise when a DTS CD starts playing. Also, speakers which were set to Small in the Speaker Installation screen are automatically set to Large. This is not a malfunction. When set to DTS CD Playback, playback is optimized for DTS CDs. In this mode you cannot play standard audio CDs through the analog outputs. Change the setting back to PCM Playback to play standard CDs. • Even if you set Audio Output Mode to 5.1 Channel, you'll only get sound from all speakers when playing a multichannel DVD-Audio disc, SACD, or Dolby Digital or DTS encoded DVD disc. • When set to 5.1 Channel, only the front left/right channels are output from the AUDIO OUT (2ch) jacks. Change to 2 Channel if you want to listen to downmixed stereo audio (for example, because you are listening through the TV's built-in speakers). • When set to 5.1 Channel there is no digital output when playing DVD-Audio. • If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is mixed down to two channels so you still hear all the audio recorded on the disc. • Some DVD-Audio discs don't allow down-mixing of audio. These discs always output multi-channel audio regardless of the setting made here. Speakers Audio Output Mode • Set in Setup Navigator (Default: 2 Channel) Initial Settings Digital Audio Out Video Output Language Display Options Speakers Audio Output Mode Speaker Installation Speaker Distance Channel Level 2 Channel 5.1 Channel Speaker Installation • Set in Setup Navigator (default: L/R: Large | C: Large | LS/RS: Large| SW: On ) You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. This setting does not affect digital audio output. Initial Settings If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to 5.1 Channel; if you connected only the stereo outs, set to 2 Channel. 64 En Digital Audio Out Video Output Language Display Options Speakers Audio Output Mode ‰ 2 Channel Speaker Installation Speaker Distance Channel Level ‰ Fix