Pioneer DV-45A Owner's Manual - Page 66
The Initial Settings Menu, Channel Level
View all Pioneer DV-45A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
08 The Initial Settings Menu 3 Use the joystick (up/down) to change the distance. • When you change the distance settings of the front left (L) or front right (R) speakers, all the other speaker distances change relative to it. • Front left/right (L/R) speakers can be set from 1 ft. to 30 ft. in 0.5 ft. increments. • Center speaker (C) and subwoofer (SW) can be set from - 6.5 ft. to +6.5 ft. relative to the front left/right speakers • Surround left/right (LS/RS) speakers can be set from -20 ft. to +6.5 ft. relative to the front left/right speakers. 4 Move the cursor left to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the Speaker Distance screen. • Speaker Distance settings do not affect SACD playback. Channel Level • Default setting: Fix You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. This setting does not affect digital audio output. Initial Settings Digital Audio Out Video Output Language Display Options Speakers Audio Output Mode Speaker Installation Speaker Distance Channel Level Fix Variable When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Variable if you want to adjust the relative levels to balance the surround sound better for your listening room. Initial Settings Digital Audio Out Video Output Language Display Options Speakers Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB You can set the individual channel levels between -6dB and +6dB using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Automatic: Select Auto to start the test tone output. Initial Settings Digital Audio Out Video Output Language Display Options Speakers Auto L 0.0dB C 0.0dB R 0.0dB RS 0.0dB LS 0.0dB SW 0.0dB As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the joystick (up/down) to adjust the channel output level of the current speaker. Note that the test tone is not output from the subwoofer. Move the joystick left to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen. 66 En