ProForm Fusion 6.0 Lx English Manual - Page 15

30. Wrap the Butterfly Cable (73) over a Pulley (43). 30 Attach the Pulley to the Right Top Frame (3) with an M10 x 40mm Bolt (116) and an M10 Nylon Locknut (111). Repeat this step with another Pulley (43). 111 43 73 3 43 116 31. Wrap the Butterfly Cable (73) under a Pulley (43). 31 Attach the Pulley, a Cable Trap (48), and two Half Finger Guards (46) at the second hole from the top of the pair of Pulley Plates (49) with an M10 x 50mm Bolt (106) and an M10 Nylon Locknut (111). Makes sure that the Cable Trap is orient- ed to hold the Cable in the groove of the Pulley. 32. Wrap the Butterfly Cable (73) over a Pulley (43). 32 Attach the Pulley to the Right Top Frame (3) with an M10 x 45mm Bolt (95) and an M10 Nylon Locknut (111). 111 73 43 46 46 49 48 49 106 3 95 111 43 73 33. Wrap the Butterfly Cable (73) over a Pulley (43). 33 Attach the Pulley to the Center Top Frame (6) with an M10 x 45mm Bolt (95) and an M10 Nylon Locknut (111). 15 6 111 95 43 73