ProForm Fusion 6.0 Lx English Manual - Page 16

34. Attach the Butterfly Cable (73) and a Weight Cap 34 (67) to the indicated Weight Tube (75) with an M10 x 50mm Bolt (106) and an M10 Nylon Locknut (111). 73 111 67 106 75 35. Locate the Low Cable (70). Route the Cable 35 through the Leg Lever (15) and the Curl Post Upright (10). Attach a Pulley (43) to the Leg Lever (15), over the Low Cable (70), with an M10 x 45mm Bolt (95) and an M10 Nylon Locknut (111). 36. Attach a Pulley (43) inside the Curl Post Upright 36 (10), over the Low Cable (70), with an M10 x 65mm Bolt (110), two M10 Washers (109), two 1/2" Spacers (68), and an M10 Nylon Locknut (111). 15 10 111 43 70 95 111 68 109 10 43 70 109 110 68 37. Route the Low Cable (70) through the Right Seat Upright (11) and the Right Upright (7) and under a Pulley (43). Attach the Pulley, an M10 Washer (109), and two Half Finger Guards (46) to the Right Base (1) with an M10 x 45mm Bolt (95) and an M10 Nylon Locknut (111). 37 111 46 7 11 70 109 43 1 46 95 16