ProForm Fusion 6.0 Lx English Manual - Page 19
Locate the Press Cable 72.
View all ProForm Fusion 6.0 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
48. Attach the High Cable (88) and a Weight Cap 48 (67) to the indicated Weight Tube (75) with an M10 x 50mm Bolt (106) and an M10 Nylon Locknut (111). 49. Locate the Press Cable (72). Attach the Cable to 49 the Left Base (2) with an M8 x 25mm Shoulder Bolt (92). Make sure that the Cable end can pivot easily around the shoulder of the Bolt. 88 111 67 106 75 92 2 72 50. Wrap the Press Cable (72) over a Pulley (43). 50 Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Finger Guards (45) to the Leg Press (12) with an M10 x 120mm Bolt (97) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 51. Wrap the Press Cable (72) under a Pulley (43). 51 Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Finger Guards (45) to the Left Seat Upright (14) with an M10 x 120mm Bolt (97) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 48 45 97 43 111 109 72 45 12 43 48 97 14 109 72 45 45 111 52. Wrap the Press Cable (72) under a Pulley (43). 52 Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Half Finger Guards (46) to the Press Frame (13) with an M10 x 45mm Bolt (95) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 109 46 95 111 48 46 43 72 13 19