RCA DRC6350N User Guide - Page 11

Connections and Setup TV (BACK PANEL) TV DVD/VCR 2 CABLE OR OFF-AIR SIGNAL ANT IN AUDIO IN IN VIDEO IN R L S-VIDEO IN 3 DVD/VCR PLAYER ANT. IN RF OUT 1 VCR IN LINE1 DVD/VCR COMPONENT AUDIO OUT VIDEOOUT OUT 4A S-VIDEO OUT Note: For a more detailed explanation of the jacks on the back of the DVD/VCR, go to page 51. DVD/VCR + TV 1. Connect a coaxial cable to the Cable/Antenna jack on your TV (sometimes labeled ANT IN) and to the TV jack on your DVD/VCR player. 2. Connect the coaxial cable from your cable outlet, cable box, or antenna to the ANT IN jack on your DVD/VCR. 3. Connect the audio cables to the AUDIO OUT L (left - white) and R (right - red) jacks on the back of your DVD/VCR player, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO IN L and R). 4. Connect the video cable. A. Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD/VCR player, and to the Video Input jack on your TV (sometimes labeled VIDEO IN). If you want to record a tape and watch a DVD at the same time, you must also connect an S-video cable or component video cables for the DVD signal. B. Component video (optional, connection not pictured) - If your TV has component video jacks (Y, Pb, Pr), connect component video cables (not provided) to the COMPONENT OUT jacks on the DVD/VCR player for the best picture quality. This connection is only for DVD signal. For the VCR signal, you must also connect the standard video cable. C. S-Video (optional, connection not pictured) - If your TV has an S-Video jack, connect an S-Video cable (not provided) to the S-VIDEO OUT jack on the back of your DVD/VCR player and to the S-VIDEO IN jack on your TV. This connection is only for DVD signal. For the VCR signal, you must also connect the standard video cable. 5. Connect the AC power cord into an AC outlet. Go to page 9 Chapter 1 7