RCA DRC6350N User Guide - Page 14

Connections and Setup Using the Remote Control to Choose On-screen Menu Items Press the MENU button to bring up the Main Menu. To select an on-screen item, use the up and down arrow buttons on the remote control. Selecting a menu item can take you to another menu, activate a choice, or activate a data entry field (such as the hour field in the CLOCK menu). If a number doesn't appear next to an on-screen menu, use the arrow buttons to highlight an item on the screen, and press OK to select the highlighted item. CLOCK PROGRAM TUNING SETUP SELECT ENTER TO EXIT PRESS This is the VCR Main menu. Complete the VCR setup To set up the VCR, you'll need to set a few important menu items the first time you turn on the unit. AUTO CHANNEL SET TUNING BAND: TV CH. ADD/DEL: CH. 2 ADD SOURCE SELECT: TUNER SELECT ADJUST TO EXIT PRESS Auto Channel Search Before you can watch channels through the VCR, you must set the type of signal you have (cable or TV) and search for all available channels. 1. Press MENU to display the VCR Main Menu. 2. Press the down arrow button until TUNING is highlighted, and press OK (the Tuning menu appears). 3. Press the down arrow button until TUNING BAND: is highlighted, and press the right arrow button until the type of signal you have is shown (CATV or TV). 4. Press the up arrow button until AUTO CHANNEL SET is highlighted, and press the right arrow button (auto channel search starts). This may take several seconds. When finished, your available channels appear. To add or delete any channels, see page 32. 10 Chapter 1