Ricoh 8200DN Administration Guide - Page 35

2 SafeCom Go Ricoh If the SafeCom server has multiple IP addresses there will be an entry for each. If the SafeCom server is clustered you must ensure that it is only the entry matching the IP address of the virtual server and not the nodes. In a multi server solution click Move up and Move down to prioritize the order in which the servers are contacted in case the first one on the list becomes unavailable. If the device is added via SafeCom Administrator the list of SafeCom servers will include the list of prioritized failover servers. For additional information about failover servers refer to SafeCom G3 Administrator's Manual D60603 If broadcasting fails you may have to directly enter the IP address in Add server and click Add. 4. Click Apply. Note: After you click Apply, it takes one minute before the new SafeCom Server settings take effect. Wait, otherwise there may be a login error at the printer. 2.8.3 Resend configuration If a device added in the SafeCom Administrator is not configured correctly, or if the device must be reconfigured to a different server, it is possible to resend configuration details (Server address and Group name) to the device. 1. Browse to Devices in the SafeCom Administrator. 2. Right-click the device and click Resend configuration. The configuration details are now sent to the device and the configuration is successful when Server is reconfigured appears. Note: The Resend configuration functionality does not work with devices that are SafeCom enabled via the device server. 2.8.4 Register device 1. Open the Register web page. 2. Enter the User logon and PIN code of a user with Technician or Administrator rights. The user must have a PIN code. 3. Click Register. Once the device is registered it appears in SafeCom Administrator. The device can also be registered with the SafeCom solution when:  Using the Add device function in SafeCom Administrator.  Login at the device if the user has Technician or Administrator rights. D60703-17 35