Ricoh C410DN Hardware Guide - Page 148
Cleaning the Friction Pad
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Cleaning the Printer Cleaning the Friction Pad If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case, clean the pad as follows: A Slowly slide the paper tray (Tray 1) out, until it stops. After that, lift the front of the tray slightly, and then pull the tray completely out. AET041S B Place the tray on a flat surface. When there is paper in the tray, remove paper. C Wipe the friction pad with a soft damp cloth. After that, wipe it with a dry cloth to remove the water. 7 ZKEY700E Important ❒ Do not use chemical cleaner or organic solvent such as thinner or benzene. 136
Cleaning the Printer
136
7
Cleaning the Friction Pad
If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case,
clean the pad as follows:
A
Slowly slide the paper tray (Tray 1) out, until it stops. After that, lift the
front of the tray slightly, and then pull the tray completely out.
B
Place the tray on a flat surface. When there is paper in the tray, remove paper.
C
Wipe the friction pad with a soft damp cloth. After that, wipe it with a dry
cloth to remove the water.
Important
❒
Do not use chemical cleaner or organic solvent such as thinner or benzene.
AET041S
ZKEY700E