Ricoh C410DN Hardware Guide - Page 47
face card until it stops., With the antenna and the indented end toward you, slowly insert the inter
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Attaching IEEE 802.11b Interface Unit F Attach the antenna to the card with the label facing down and the uneven side of the antenna facing up. 2 AET096S G With the antenna and the indented end toward you, slowly insert the interface card until it stops. AQC097S H Hold the antenna cap with the cut off corners towards you and fit it over the card. AQC098S Note ❒ After finishing installation, you can check the 802.11b interface unit is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, "IEEE 802.11b" will appear for "Device Connection" on the configuration page. ❒ If the 802.11b interface unit is not installed properly, reinstall it following this procedure. If you cannot install it properly even after attempting reinstallation, contact your sales or service representative. Reference For printing the configuration page, see "Test Printing", Quick Installation Guide. 35