Ricoh C410DN Hardware Guide - Page 29
Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module - drivers
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module) Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module) R CAUTION: • Do not touch the inside of the controller board compartment. Doing so may cause a malfunction or a burn. 2 Important ❒ Before touching the memory unit, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the memory unit. ❒ Do not subject the memory unit to physical shocks. ❒ Available memory varies depending on a model type. ❒ Before using the new memory unit, Be sure to make settings in the printer driver. A Turn off the power, and then unplug the power cable. B Loosen the three screws securing the controller board. AQC630S The screws cannot be fully removed. 17