Ricoh C410DN Hardware Guide - Page 85
Communication Speed, Auto Select, Infrastructure, 11 Ad hoc, IEEE 802.11b, SSID Setting, ABC/123
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
IEEE 802.11b (Wireless LAN) Configuration I Set [Communication Speed] in the same way. The factory default is [Auto Select]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed. J Print a configuration page to confirm the settings made. Reference For details about printing the configuration page, see "Test Printing", Quick Installation Guide. Setting SSID If [Infrastructure] or [802.11 Ad hoc] is selected for [Communication Mode], set SSID to use for transmission. 4 Confirm the network administrator for SSID to use. A In the [IEEE 802.11b] menu, select [SSID Setting] using {T} or {U}, and then press the {OK} key. If an SSID has been set, you can check the SSID setting. B The message "Enter SSID." appears. Press [Text]. C Enter characters using {T} or {U}, and then press the {OK} key. You can switch among upper/lower cases, numeric codes, and symbols by pressing [ABC/123]. The characters that can be used are ASCII 0x20-0x7e (32 bytes). D Print a configuration page to confirm the settings made. 73